Omron BP652 Instruction Manual - Page 17
Resetting to the Default Setting, If the Positioning indicator is on1 or on2 - 7 series
View all Omron BP652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
SETTING THE ADVANCED POSITIONING SENSOR (APS) If the Positioning indicator is "on1" or "on2": on1: The buzzer sounds only when the monitor is in proper position. on2: The buzzer sounds a series of two short blips if your wrist is too far away from the measuring position, and beeps when your wrist is in the proper position. oFF: The buzzer will not sound. If the Positioning indicator is "oFF": on: The buzzer sounds when pressing any buttons. oFF: The buzzer will not sound. RESETTING TO THE DEFAULT SETTING The positioning indicator is set "on1", the wrist for measurement is set " ", and the buzzer is set "on1" as default. To reset to the default setting, press and hold the SET button while in the setting mode, then press the START/STOP button simultaneously for more than 2 seconds. 17