Onkyo A-9010 Instruction Manual - Page 15

Specifications Rated output power: 44 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.08 % (FTC) 70 watts minimum continuous power per channel, 4 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7 % (FTC) (North American) 2 ch × 44 W at 8 ohms, 1 kHz, 2 ch Driven of 0.08 % (IEC) 2 ch × 70 W at 4 ohms, 1 kHz, 2 ch Driven of 0.7 % (IEC) (European) Maximum effective output power: 2 ch × 85 W at 4 ohms, 1 kHz, 2 ch driven (JEITA) (Asian) THD+N (Total Harmonic Distortion+Noise): 0.08 % (Rated output power) Damping factor: 95 (1 kHz, 8 h) Input sensitivity and impedance (unbalance): 150 mV/100 kh (LINE) 3.0 mV/47 kh (PHONO MM) Rated RCA output level and impedance: 150 mV/2.2 kh (LINE OUT) Phono overload: 94 mV (1 kHz 0.5 %) Frequency response: 10 Hz - 100 kHz/i1 dB, j3 dB (LINE 1) Tone control characteristics: ±10 dB, 100 Hz (BASS) ±10 dB, 10 kHz (TREBLE) Signal to noise ratio: 97 dB (LINE, IHF-A) 77 dB (PHONO MM, IHF-A) Speaker impedance: 4 h - 16 h Power supply: AC 120 V, 60 Hz (North American) AC 220 - 240 V, 50/60 Hz (European) Power consumption: 140 W (North American) 155 W (European) 0.3 W (Stand-by, North American) 0.4 W (Stand-by, European) 20 W (No-sound, North American) 25 W (No-sound, European) Dimensions (W × H × D): 435 mm × 129.5 mm × 332.5 mm (17-1/8q × 5-1/8q × 13-1/16q) Weight: 6.5 kg (14.3 lbs) ∫ Audio inputs Digital (North American and Continental European): DIGITAL IN (D1 COAXIAL, D2 OPTICAL) Sampling frequency (PCM): 32, 44.1, 48, 88.2, 96, 176.4, 192 kHz (COAXIAL) 32, 44.1, 48, 88.2, 96 kHz (OPTICAL) Analog: LINE IN 1-4, LINE IN 5 (front) PHONO (MM) ∫ Audio outputs Analog: Speaker outputs: Phones: LINE OUT SPEAKERS L/R PHONES (ø 6.3 mm, 1/4q) ∫ Others RI: 1 Specifications and features are subject to change without notice. En-15