Onkyo A-9050 Owner Manual - Page 24
Adjusting the Bass, Treble and Balance, Muting the Sound, Using Headphones
View all Onkyo A-9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Adjusting the Bass, Treble and Balance You can adjust the bass, treble and left/right output balance respectively. ■ Operating on the integrated amplifier Muting the Sound You can temporarily mute the output of the integrated amplifier. MUTING BASS -/+ TREBLE -/+ BALANCE L/R 1 Press MUTING. The SPEAKERS (A/B) and SELECTOR LEDs blink. To unmute the integrated amplifier, press MUTING again. 1 Turn the BASS -/+, TREBLE -/+ and BALANCE L/R knobs. Tip • By default, bass, treble and balance is set to the center position. Note • While the Direct function is enabled, bass and treble are disabled. Note • While the integrated amplifier is muted: - Adjusting the volume or setting the integrated amplifier to Standby will unmute the integrated amplifier. Using Headphones PHONES jack 1 Connect a pair of stereo headphones with a standard plug (1/4 inch or 6.3 mm) to the PHONES jack. When connecting the headphones, the SPEAKERS (A/B) LEDs go off. You can adjust the volume and mute the sound, by using VOLUME R/X. While headphones are connected, no sound is output from the speakers and PRE OUT jacks. Note • Always turn down the volume before connecting your headphones. • When headphones are connected, the SPEAKERS button En cannot be used. 24