Onkyo A-905TX User Manual English - Page 13

Before using Connections Preparations Operation About the LINE/DVD connector You can connect this connector to the audio output of video devices, such as a DVD player, Satelite tuner, VCR, or the audio output of a second CD player or tape deck. Note: You cannot connect a turntable to this connector. If you wish to connect a turntable, obtain a phono equalizer at a store and connect it as described in the instruction manual that comes with the phono equalizer. About the CDR/PC, MD, and TAPE connectors You can also connect a second MD recorder or tape deck to the CDR/PC connector, and/or connect a second device to the MD or TAPE connector. (If you try to connect an Onkyo tape deck, MD recorder, or CD recorder that has connectors in this way, a malfunction may occur. Do not use the cables for connections.) You can connect a digital audio processor for a personal computer to the CDR/PC connector. About the processor's connectors You can connect a sound processor (e.g. graphic equalizer, surround processor, etc.) to the unit. Before connecting • Disconnect the jumper plugs using the PROCESSOR connectors. - Please retain them for future use. - Never connect the jumper plugs to the other connectors, as this may cause the unit to malfunc- tion, so that the sound is not reproduced. - If you do not use the PROCESSOR connectors, reconnect the jumper plugs to them firmly. Note: When connecting jumper plugs, make sure you hold the plugs horizontally as shown in the figure and connect each plug to the IN and OUT jacks. Other Information PORUOTCESSINOR Connect the sound processor to the unit. This unit L OUT(REC) IN (PLAY) L L SPEAKERS R R TUNER LINE/DVD TAPE REMOTE CONTROL R OUT(REC) IN(PLAY) OUT(REC) IN (PLAY) L R OUT IN SUBWOOFER CDR/PC CD MD PROCESSOR PRE OUT CAUTION: SPEAKER IMPEDANCE 4 OHMS MIN./SPEAKER AC OUTLET AC 230-240V 50Hz SWITCHED 100W MAX. OUT(REC) IN(PLAY) L R TUNER CD MD OUT IN SUBWOOFER PROCESSOR PRE OUT : Signal flow Jumper plug INPUT Sound processor OUTPUT 13