Onkyo A-9130 User Manual English etc. - Page 19
Switching the unit to power, amplifier mode
View all Onkyo A-9130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
1. Turn the TREBLE -/+ controller to enhance or moderate the treble. BALANCE (main unit only) 1. Turn the BALANCE L/R controller on the main unit to adjust the balance of the sounds output from the left and right speakers. Switching the unit to power amplifier mode 1 Basic Operations "Speaker impedance settings" (p14) / "RI function settings" (p15) / "Switching input and adjusting the volume" (p16) / "Subwoofer output settings" (p17) / "Adjusting the sound quality and balance" (p18) / "Setting auto standby" (p20) 0 When switched to power amplifier mode, if the volume of the connected pre-amplifier is low, auto standby (p20) may function and the power may automatically switch to standby. If this happens, you may be able to fix it by increasing the volume on the pre-amplifier. 0 Also read the instruction manual of the pre-amplifier you connected to this unit. 3" Perform the following operations to switch the unit to power amplifier mode to use this unit as a power amplifier when you have connected a pre-amplifier to the MAIN IN jack on this unit (p12). 0 Power amplifier modes settings are not available if headphones are connected. 1. Press and hold MAIN IN until the "DIRECT" and "MAIN IN" indicators light on the main unit. Press and hold MAIN IN to cancel the power amplifier mode. Note that the power amplifier mode is not canceled even if this unit goes to standby mode. 0 When you cancel the power amplifier mode, BASS, TREBLE, BALANCE, DIRECT, and PHASE MATCHING BASS revert to the settings prior to changing to the power amplifier mode. 0 There is no audio output from the PHONES jack and LINE OUT jacks while the power amplifier mode is engaged. The following functions are also unavailable while the power amplifier mode is on. En 19