Onkyo AVX280 Owner Manual - Page 14
Wall Mounting, Using the Rubber Stoppers for a More, Stable Platform
View all Onkyo AVX280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Wall Mounting The speakers can easily be wall mounted by using the keyhole slots. To prevent the speaker from vibrating against the wall, attach two of the supplied thick rubber stoppers to the rear of each speaker. To mount the front or surround speakers vertically, use the keyhole slot shown to hang each speaker on a screw that's securely screwed into the wall. Front speakers (SKF-380) Keyhole slot for wall mounting • Leave a gap of between 3/16" (5 mm) and 7/16" (10 mm) between the wall and the base of the screw head, as shown. (We recommend that you consult a home installation professional.) Wall 3/16" to 7/16" (5 mm to 10 mm) Using the Rubber Stoppers for a More Stable Platform We recommend using the provided rubber stoppers to achieve the best possible sound from your speakers. The rubber stoppers prevent the speakers from moving, providing a more stable platform. Use thick stoppers for the center speaker, and thin stoppers for the other speakers. Thick rubber stoppers Surround speakers (SKR-380) Thin rubber stoppers Bottom of the SKF-380 Bottom of the SKR-380 Keyhole slot for wall mounting Thick rubber stoppers Thick rubber stoppers To mount the center speaker horizontally, use the two keyhole slots shown to hang each speaker on two screws that are securely screwed into the wall. Bottom of the SKC-380 2-3/16" (55 mm) 1/2" (12 mm) Center speaker (SKC-380) Keyhole slot for wall mounting Thick rubber stoppers 8-9/16" (217 mm) Using the Floor Pads for Subwoofer If the subwoofer is placed on a hard floor (wood, vinyl, tile, etc.) and playback is very loud, the subwoofer's feet may damage the flooring. To prevent this, place the supplied pads underneath the subwoofer's feet. The pads also provide a stable base for the subwoofer. Caution • A mounting screw's ability to support a speaker depends on how well it's anchored to the wall. If you have hollow Pad walls, screw each mounting screw into a stud. If there are no studs, or the walls are solid, use suitable wall anchors. • Use screws with a head diameter of 5/16" (9 mm) or less and a shank diameter of 1/8" (4 mm) or less. With hol- low walls, use a cable/pipe detector to check for any power cables or water pipes before making any holes. En 14