Onkyo BD-SP353 User Manual English etc. - Page 40
Control Function
View all Onkyo BD-SP353 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Problem Check Noise can be heard when outputting DTS Digital Surround signals from the DIGITAL AUDIO OUT (OPTICAL) terminal. Is the connected AV receiver or amplifier compatible with DTS Digital Surround? 192 kHz or 96 kHz digital audio signals cannot be output from the DIGITAL AUDIO OUT (OPTICAL) terminal. Secondary audio or interactive audio is not output. Is HDMI Audio properly set? Are Digital Output properly set? After a disc is inserted, Loading stays displayed and playback does not start. ■ is displayed in file names, etc. Are there too many files recorded on the disc? A message indicating low memory appears while playing a BD-ROM disc. Remedy If an AV receiver or amplifier that is not compatible with DTS Digital Surround is connected to the DIGITAL AUDIO OUT (OPTICAL) terminal, set DTS Digital Surround and HDMI Surround to PCM. • Copyright-protected audio is converted to 48 kHz or less before output. • Set Max Sampling Frequency to 96 kHz or 192 kHz. When listening to the sound from an HDMI OUT terminal, set HDMI Audio to Reencode or PCM. When listening to the sound from a DIGITAL AUDIO OUT (OPTICAL) terminal, set Digital Output to Reencode or PCM. When a disc on which files are recorded is inserted, depending on the number of files recorded on the disc, loading may take several dozen minutes. The characters that cannot be displayed on this player are displayed in ■. When you are input characters via media and peripheral equipment, etc., the characters which include simplified character of part or all simplified character is no true display. • Connect a USB device. • Erase the data stored on the connected USB device from BUDA Setup. Control Function Problem Control function does not work. 40 Check Is the HDMI cable properly connected? Is the HDMI cable you are using a High Speed HDMI®/ TM Cable? Is Control with HDMI set to On on the player? Does the connected device support the Control function? Remedy To use the Control function, connect the Flat Screen TV, and AV system (AV receiver or amplifier, etc.) and HD AV Converter to the HDMI OUT terminal. Use a High Speed HDMI®/ TM Cable. The Control function may not work properly if an HDMI cable other than a High Speed HDMI®/ TM Cable is used. Set Control with HDMI to On on the player. • The Control function will not work with devices of other brands that do not support the Control function, even when connected using an HDMI cable. • The Control function will not work if devices that do not support the Control function are connected between the Control-compatible device and the player. • See About connections to components of other makes supporting the Control function on page 13. • Even when connected to an Onkyo product compatible with the Control function, some of the functions may not work. Also refer to the operating instructions of the connected device.