Onkyo CS-545 CR-545 User Manual English - Page 42

Setting the Clock 8 Press [ENTER]. The AccuClock function sets the clock automatically the very first time the CD receiver is plugged into a wall outlet (see page 17). If for some reason the clock cannot be set automatically, use the following procedure to set it manually. Note that when the clock is set manually, it will not be updated automatically. 1 Press the [TIMER] button repeatedly until "Clock" appears. 2 Press the [ENTER] button, then appears "AccuClock". 3 Use the [ ] / [ ] buttons to select "Manual Adjust". 4 Press [Enter]. The clock is set and the second dot starts flashing. Displaying the Day and Time To display the day and time, press the remote controller's [CLOCK CALL] button. Press the button again or perform another operation to cancel the time display. If the CD receiver is on Standby, the day and time will be displayed for 8 seconds. While the CD receiver is on, the day and time are displayed continuously. AccuClock with a Specific Station If for some reason the AccuClock function doesn't set the clock correctly, you can specify which FM station the AccuClock function uses. This is especially useful if you live close to a country's border where stations from different time zones can be received. Note that the FM station must support RDS CT (Clock Time) information. 5 Use the [ ] / [ ] buttons to select the day of the week. You can select: SUN, MON, TUE, WED THU, FRI, or SAT. 6 Press [ENTER]. Tip: To change the time format between 24hour and 12-hour, press the [DISPLAY] button. 7 Use the remote controller's number buttons to enter the current time. You can also use the [ ] / [ ] buttons. Use the remote controller's [ > 10] button to select A.M. or P.M. 1 Press the [TIMER] button repeatedly until "Clock" appears. 2 Press [ENTER]. 3 Use the [ ] / [ ] buttons to select "AccuClock". 4 Press [Enter]. The frequency of a station that the CD receiver has previously searched for may appear on the display. 42