Onkyo DP-S1 Owners Manual - Basic/Advanced - Page 43

> Before Start > Part Names > Initial Setup > Playback Copying Playback music with "X-DAP Link" 1 2 3 8 Advanced Setup | Supplementary Information | Others You can copy music files stored on your computer to the built-in storage on this unit or to a micro SD card in this unit, then listen to the music through the "Library" (P14). You can copy either using the data copying software "X-DAP Link" or by dragging and dropping (P13). 0 X-DAP Link is compatible with Windows® 10 (32bit/64 bit), Windows® 8/ 8.1 (32 bit/64 bit), and Windows® 7 (32 bit/64 bit). 0 To copy to a micro SD card, insert a micro SD card into the card slot (P5). 0 When removing the micro SD card, unmount the micro SD card before removing it (P32). 0 NTFS format micro SD cards are not supported on this unit. Install [X-DAP Link] on your computer This unit supports X-DAP Link versions 1.2.0 and later. When using version 1.2.0 or earlier, install the latest version before continuing. Perform the following procedure when the unit is on. 1. Start your computer and download the installer for X- DAP Link from the following site. http://www.jp.onkyo.com/audiovisual/portable/dap/ license.htm Double-click "setup.exe" to install. Follow the on-screen instructions to install. A shortcut is created on the desktop after installation. 2. Connect this unit to a computer with the supplied micro USB cable. Connect so the wider side of the plug is down when inserting into this unit's micro USB port. You may damage the plug or jack if you try to insert it the wrong way. Screen "Change to USB Mass Storage Mode?" is displayed, so tap "Yes". Do not tap "Unmount", displayed when you tap this, until the transfer of the playlist is complete. If you do tap it, unplug the micro USB cable, then connect it again.