Onkyo DV-BD507 Owner Manual - Page 48

FUNCTION SETUP 5 Press [RETURN] to go back to the previous screen, or press [SETUP] to exit. Disable Deactivate all the network connection and settings. 1 Follow steps 1 to 4 in "Connection Test" on page 45. 2 Use [K / L] to select "Disable", then press [ENTER]. 3 Press [RETURN] to go back to the previous screen, or press [SETUP] to exit. 5 Disc tray will open automatically. • Insert the disc for software upgrade and then press [OPEN/CLOSE A]. 6 After completing loading disc, confirmation message will appear. Select "Yes" and press [ENTER] to start upgrading. • It may take a while to complete the upgrading. (Please wait until "100%" appears on the front panel display.) 7 After the disc upgrade finishes, this unit will restart and eject the disc. Note • The network connection can be reactivated by setting the network connection to "Enable(Easy)" or "Enable(Custom)". Note • Please do not unplug the AC power code while executing the "Disc Upgrade". • All settings will remain the same even if you upgrade the firmware version. Software Upgrade Current Version You can confirm the current software version. 1 Follow steps 1 to 3 in "Connection Test" on page 45. 2 Use [K / L] to select "Software Upgrade", then press [ENTER]. 3 Use [K / L] to select "Current Version", then press [ENTER]. Others Current Version Current Version x.xxx If you wish to check latest upgrade or other product information, please check our Website. www.onkyo.com 4 Press [ENTER] or [RETURN] to exit. Note • Please visit www.onkyo.com to download the latest firmware version. Disc Upgrade You can upgrade the software by using disc. 1 Follow steps 1 to 3 in "Connection Test" on page 45. 2 Use [K / L] to select "Software Upgrade", then press [ENTER]. 3 Use [K / L] to select "Disc Upgrade", then press [ENTER]. 4 Use [K / L] to select "Yes", then press [ENTER]. Network Upgrade You can upgrade the software by connecting the unit to the Internet. 1 Follow steps 1 to 3 in "Connection Test" on page 45. 2 Use [K / L] to select "Software Upgrade", then press [ENTER]. 3 Use [K / L] to select "Network Upgrade", then press [ENTER]. 4 Use [K / L] to select "Yes", then press [ENTER]. • This unit will then start checking for the latest firmware version. 5 Confirmation message will appear. Use [K / L] to select "Yes", then press [ENTER]. • The unit will start downloading the latest firmware version. 6 When the download completes, confirmation message will appear. Press [ENTER]. • The unit will start upgrading the firmware version. • It may take a while to complete the upgrading. (Please wait until "100%" appears on the front panel display.) 7 After upgrading finishes, this unit will restart and open the disc tray automatically. Note • Please do not unplug the AC power code or LAN cable while executing the "Network Upgrade". • All settings will remain the same even if you upgrade the software version. • The disc tray will open automatically after upgrading finishes. This is not a malfunction. 48 EN