Onkyo FR-N3X User Manual English - Page 36
An MD after recording, t dub?, Selecting a recording mode while the input source is MD and
View all Onkyo FR-N3X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Settings for Recording (continued) N An MD after recording When the power is down If the power is down or if you dis- connect the power cord acciden- The TOC indicator flashes. tally while the TOC indicator is lit or flashing, the data recorded prior to power down will be TOC indicator erased. Information, such as track numbers, is written into the table of contents (TOC) on the MD before you eject the MD, before the recorder enters standby mode, or before recording is stopped. Do not disconnect or move the power cord under the following situations. Otherwise, the data will not be written correctly. (Also, refer to the "When the power is down" section on the When "Retry Error" appears Eject the MD, insert it again, then try recording again. right.) • When the TOC indicator is lit The information to be written into the TOC is currently stored in memory on the FR-N3X. • When the TOC indicator is flashing The information is being written to the MD. N Can't dub? • "Cannot Rec" appears on the display. The current MD is for playback only. Use a recordable MD. • "Protected" appears on the display. The MD is write-protected. See "Precautions for handling the MiniDisc (MD)" on page 12. • "Disc Full" appears on the display. The MD has no space available for recording. Use a new MD. • "CD Dub Fail" appears on the display. The MD mechanism is still operating. Wait a while, then press CD DUBBING. The CD is in RANDOM mode. Press MODE to cancel RANDOM mode. N Selecting a recording mode (while the input source is MD and the recorder is stopped) Select Record mode before you start recording. 1 Press EDIT/CLEAR/NO. 2 Turn MULTI JOG to display "Rec Mode?". 3 Press MULTI JOG. 36