Onkyo HT-RC330 Owner Manual

Onkyo HT-RC330 Manual

Get Onkyo HT-RC330 PDF manuals and user guides View all Onkyo HT-RC330 manuals
Add to My Manuals
Save this manual to your list of manuals

Onkyo HT-RC330 manual content summary:

  • Onkyo HT-RC330 | Owner Manual - Page 1
    AV Receiver HT-RC330 Instruction Manual Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new
  • Onkyo HT-RC330 | Owner Manual - Page 2
    the apparatus from the wall outlet and refer 3. Heed all warnings. servicing to qualified service personnel under the 4. Follow all instructions. following conditions: 5. Do not use this apparatus near water. A. When the power-supply cord or plug is damaged, 6. Clean only with dry cloth
  • Onkyo HT-RC330 | Owner Manual - Page 3
    turn on the unit, contact your Onkyo dealer. 3. Care-Occasionally you power cord from the AC outlet. 5. Preventing Hearing Loss Caution Excessive sound pressure from earphones and headphones can cause hearing loss. 6. Batteries and Heat Exposure Warning Batteries (battery pack or batteries installed
  • Onkyo HT-RC330 | Owner Manual - Page 4
    corrosion. • Remove expired batteries as soon as possible to prevent damage from leakage or corrosion. ■ Aiming the remote controller To use the remote controller, point it at the AV receiver's remote control sensor, as shown below. Remote control sensor AV receiver Approx. 16 ft. (5 m) En 4
  • Onkyo HT-RC330 | Owner Manual - Page 5
    41 Resetting the Remote Controller 41 Controlling Other Components 41 Appendix Troubleshooting 43 Connection Tips and Video Signal Path 47 USB Features 48 About HDMI 49 Using an RIHD-compatible TV, Player, or Recorder ... 50 Specifications 52 To reset the AV receiver to its factory defaults
  • Onkyo HT-RC330 | Owner Manual - Page 6
    Features Amplifier • 60 Watts/Channel @ 8 ohms (FTC) • 100 Watts/Channel @ 6 ohms (IEC) • 120 Watts/Channel @ 6 ohms (JEITA) • Optimum Gain Volume Circuitry • H.C.P.S. (High Current Power Supply) Massive High Power Transformer Processing • HDMI (Audio Return Channel, 3D, DeepColor, x.v.Color*1, Lip
  • Onkyo HT-RC330 | Owner Manual - Page 7
    HDMI THRU indicator (35) D SPEAKERS A and B buttons (26) E Remote control sensor (4) F LISTENING MODE buttons (23) G Display (8) H DIMMER button (North American models) (27) I MEMORY button (21) J TUNING MODE button (20) K DISPLAY button (27) L SETUP
  • Onkyo HT-RC330 | Owner Manual - Page 8
    SUBWOOFER PRE OUT jack G SPEAKERS terminals (FRONT A, CENTER, SURROUND, FRONT B) H Power cord I V REMOTE CONTROL jack J Composite video and analog audio jacks (BD/DVD IN, VCR/DVR IN and OUT, CBL/SAT IN, GAME IN, TV/CD IN) K MONITOR OUT V jack See "Connecting the AV Receiver" for connection (➔ pages
  • Onkyo HT-RC330 | Owner Manual - Page 9
    Remote Controller Controlling the AV Receiver B C D E F B G H I C To control the AV receiver, press RECEIVER to select Receiver mode. J You can also use the remote controller to control D Onkyo Blu-ray Disc/DVD player, CD player, and other components. See "Entering Remote Control Codes" for
  • Onkyo HT-RC330 | Owner Manual - Page 10
    the AV Receiver Connecting Your Speakers Connecting the Speaker Cables The following illustration shows which speaker should be connected to each pair of terminals. Surround right Surround left Front B right Front B left Speakers B Front A right Center Front A left Speakers A ■ Push
  • Onkyo HT-RC330 | Owner Manual - Page 11
    powerful and solid bass. To get the best from your surround sound system, you need to set the speaker settings manually (➔ page 31). Number of channels Front speakers Center speaker Surround speakers 2345 ✔✔✔✔ ✔ ✔ ✔✔ Attaching the Speaker Cable Labels The speaker terminals are color-coded
  • Onkyo HT-RC330 | Owner Manual - Page 12
    in all the way to make good connections (loose connections can cause noise or malfunctions). • To prevent interference, keep audio and video cables away from power cords and speaker cables. AV Cables and Jacks Right! Wrong! Signal Video and Audio Video Audio Cable HDMI Component video Y PB PR
  • Onkyo HT-RC330 | Owner Manual - Page 13
    HDMI component connected to the AV receiver). If the TV power is off or the TV is set to another input source, this may result in no sound from the AV receiver or the sound may be cut off. • When the "Audio TV Out" setting is set to "On" (➔ page 35) to hear from your TV's speakers, by controlling
  • Onkyo HT-RC330 | Owner Manual - Page 14
    setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver player Blu-ray Disc/DVD player Blu-ray Disc/DVD player, RI dock Satellite/cable set-top box, RI dock, etc. TV, projector, etc. TV, projector
  • Onkyo HT-RC330 | Owner Manual - Page 15
    Onkyo components, pointing the remote controller at the AV receiver's remote control sensor instead of the component. You must enter the appropriate remote control code first (➔ page 40). e.g., CD player e.g., DVD player R L ANALOG AUDIO OUT R L ANALOG AUDIO OUT Note • Use only V cables
  • Onkyo HT-RC330 | Owner Manual - Page 16
    achieve the best possible reception. • Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords. Tip • If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead. • If you cannot
  • Onkyo HT-RC330 | Owner Manual - Page 17
    the front panel. or Press RECEIVER followed by  on the remote controller. The AV receiver will enter standby mode. To prevent any loud surprises when you turn on the AV receiver, always turn down the volume before you turn it off. Tip • See "Auto Standby" about a power management setting (➔ page 34
  • Onkyo HT-RC330 | Owner Manual - Page 18
    V or the COMPONENT VIDEO OUT, use the AV receiver's display when changing settings. This manual describes the procedure using the remote controller unless otherwise specified. Playing the Connected Component ■ Operating with the remote controller 1 Press RECEIVER followed by INPUT SELECTOR. 2 Start
  • Onkyo HT-RC330 | Owner Manual - Page 19
    front of the AV receiver, while the message "Connecting..." appears on the display. Standard Mode control The content information is not displayed on-screen, but can be operated using the iPod/iPhone or the remote controller (USB). Note • The following iPod models are not supported in Standard Mode
  • Onkyo HT-RC330 | Owner Manual - Page 20
    " will appear on the display. • If you connect a USB hard disk drive to the AV receiver's USB port, we recommend that you use its AC adapter to power it. • The AV receiver supports USB MP3 players that support the USB Mass Storage Class standard, which allows USB storage devices to be connected to
  • Onkyo HT-RC330 | Owner Manual - Page 21
    manual on the AV receiver, or the remote controller's CH +/-. Tip • You can also use the remote controller's number buttons again to store the station or channel. The station or channel is stored and the preset number The AV receiver supports four types of RDS information: PS (Program Service) When
  • Onkyo HT-RC330 | Owner Manual - Page 22
    PRESET F/S to select the type of program you want. See the table shown later in this chapter. 3 To start the search, press ENTER. The AV receiver searches until it finds a station of the type you specified, at which point it stops briefly before continuing with the search. 4 When a station you want
  • Onkyo HT-RC330 | Owner Manual - Page 23
    point-one channel). This is 7.1-channel surround sound. This is a further sound enhancement to 5.1 channel sound with two additional speakers that provide greater sound envelopment and more accurate positioning of sounds. *1 The AV receiver outputs this source in 5.1-channel surround sound. En 23
  • Onkyo HT-RC330 | Owner Manual - Page 24
    of where you are within the listening room. With this mode you can enjoy a virtual surround sound even with only two or three speakers. This works by controlling how sounds reach the listener's left and right ears. Good results may not be possible if there's too much reverb, so we recommend that you
  • Onkyo HT-RC330 | Owner Manual - Page 25
    Speaker Source Layout % 9$ Dolby Pro Logic II expands any 2-channel source for 5.1-channel playback. It 4 9$ provides a very natural and seamless surround-sound AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the player side to PCM might obtain a better sound
  • Onkyo HT-RC330 | Owner Manual - Page 26
    shown below. Speaker indicators A AB B Output channel Speakers A: 5.1 channels Speakers A: 2.1 channels* Speakers B: 2 channels Speakers B: 2 channels No sound * While Speakers B is on, channels are reduced to 2.1 in the main room. Tip • Alternatively, you can use the AV receiver's SPEAKERS A and
  • Onkyo HT-RC330 | Owner Manual - Page 27
    VCR/DVR ↔ DOCK Listening mode Tip • Alternatively, you can use the AV receiver's DISPLAY. *1 When AM or FM radio is used, the band, preset remote control code before using the remote controller for the first time (➔ page 40). Using the Music Optimizer The Music Optimizer function enhances the sound
  • Onkyo HT-RC330 | Owner Manual - Page 28
    speakers are turned off. • When you connect a pair of headphones, the listening mode is set to Stereo, unless it's already set to Stereo, Mono, or Direct. Recording Separate AV You can watch the source while recording. The AV receiver's MASTER VOLUME control has no effect on recording. 2 On your
  • Onkyo HT-RC330 | Owner Manual - Page 29
    menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver's display when changing settings. Remote indicator RECEIVER Note • The on-screen setup menus are displayed when: - There is no video input, or
  • Onkyo HT-RC330 | Owner Manual - Page 30
    input selector is automatically set to the same HDMI IN. • Do not assign the component connected with the HDMI input to TV/CD selector when you set "HDMI Ctrl (RIHD)" setting to "On" (➔ page 35). Otherwise, appropriate CEC (Consumer Electronics Control) operation will not be guaranteed. En 30 Menu
  • Onkyo HT-RC330 | Owner Manual - Page 31
    response in the manuals supplied with your speakers and set accordingly. • Choose a higher crossover frequency if you want more sound from your subwoofer. ■ Double Bass ` On ` Off Turn this setting on to boost bass output by feeding bass sounds from the front left, right, and center channels to the
  • Onkyo HT-RC330 | Owner Manual - Page 32
    A is off. - the "Audio TV Out" setting is set to "On" (➔ page 35). - "HDMI Ctrl (RIHD)" is set to "On" (➔ page 35) and you're listening through your TV speakers. - the AV receiver is muted. *1 For the center speaker and subwoofer, the level settings made by using HOME are saved here as the default
  • Onkyo HT-RC330 | Owner Manual - Page 33
    can be selected when OPTICAL IN has been assigned as an input source. If both optical and HDMI inputs have been assigned, optical input is automatically selected as a priority. ` Analog: The AV receiver always outputs analog signals. You can set priorities of audio output when there are both digital
  • Onkyo HT-RC330 | Owner Manual - Page 34
    on some sources, the Auto Standby function may activate during playback. Remote Control Settings ■ Remote ID `1, 2, or 3 When several Onkyo components are used in the same room, their remote ID codes may overlap. To differentiate the AV receiver from the other components, you can change its
  • Onkyo HT-RC330 | Owner Manual - Page 35
    is connected to the AV receiver via the HDMI cable, the name of the connected component is displayed on the AV receiver display. For example, while you are watching TV broadcasting, if you operate a Blu-ray Disc/DVD player (being powered on) by the remote control of the AV receiver, the name of the
  • Onkyo HT-RC330 | Owner Manual - Page 36
    You can boost or cut high-frequency sounds output from the front speakers. You can adjust the bass and treble for Speakers A and B front speakers, except when the Direct listening mode is selected. Operating on the AV receiver 1 Press TONE on the AV receiver repeatedly to select either "Bass" or
  • Onkyo HT-RC330 | Owner Manual - Page 37
    ■ Music Optimizer ` Off ` On Turn this setting on to enhance the sound quality of compressed music files. Use it with music files that use "lossy" compression, such as MP3. Tip • Alternatively, you can use the AV receiver's MUSIC OPTIMIZER. Note • The Music Optimizer function only works with PCM
  • Onkyo HT-RC330 | Owner Manual - Page 38
    , available from the Apple web site. For supported iPod/iPhone models, see the instruction manual of the Onkyo Dock. RI Dock With the RI Dock, you can easily play the music stored on your Apple iPod/iPhone through the AV receiver and enjoy great sound, and watch iPod/iPhone slideshows and videos on
  • Onkyo HT-RC330 | Owner Manual - Page 39
    , please refer to the instruction manual. *1 This button does not turn the Onkyo DS-A2 or DS-A2X RI Dock on or off. Your iPod/iPhone may not respond the first time you press this button, in which case you should press it again. This is because the remote controller transmits the On and Standby
  • Onkyo HT-RC330 | Owner Manual - Page 40
    You can use the AV receiver's remote controller to control your other Onkyo AV components. This section explains how to enter the remote control code (with the default underlined) for a component that you want to control: DVD, CD, etc. Preprogrammed Remote Control Codes The following REMOTE MODE are
  • Onkyo HT-RC330 | Owner Manual - Page 41
    /DVD is preprogrammed with the remote control code for controlling a component that supports the Q*1. The component must be able to receive remote control commands via Q and be connected to the AV receiver via HDMI. Use the following remote control codes: ` 32910/33001/31612: Onkyo Blu-ray Disc/DVD
  • Onkyo HT-RC330 | Owner Manual - Page 42
    K DISC +/- L MENU ✔ ✔ ✔ M RETURN ✔ G N AUDIO O CLR ✔*1 ✔ ✔ *1 The Q function is not supported. The Q supported by the AV receiver is the CEC system control function of the HDMI standard. H *2 These buttons function as colored buttons or A, B, C, D buttons. *3  (Pause) functions as
  • Onkyo HT-RC330 | Owner Manual - Page 43
    to maximum, disconnect the power cord, and contact your Onkyo dealer. Note that resetting the AV receiver will delete your radio presets and custom settings. Remote indicator RECEIVER HOME To reset the remote controller to its factory defaults, while holding down RECEIVER, press and hold down
  • Onkyo HT-RC330 | Owner Manual - Page 44
    in the LFE channel, the subwoofer produces no sound. Make sure the speakers are configured correctly. 31 ■ There's no sound with a certain signal format Check the digital audio output setting on the - connected device. On some game consoles, such as those that support DVD, the default
  • Onkyo HT-RC330 | Owner Manual - Page 45
    between the remote controller and the AV receiver's remote control sensor. Make sure that the AV receiver is not subjected to - direct sunshine or inverter-type fluorescent lights. Relocate if necessary. If the AV receiver is installed in a rack or cabinet - ■ Standby power consumption In
  • Onkyo HT-RC330 | Owner Manual - Page 46
    . Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit's malfunction. Before you record important data, make sure that the material will be recorded correctly. Before disconnecting the power cord from the wall outlet, set the AV receiver to
  • Onkyo HT-RC330 | Owner Manual - Page 47
    The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. The on-screen setup menus appear only on a TV that is connected to the HDMI
  • Onkyo HT-RC330 | Owner Manual - Page 48
    . • USB hubs and USB devices with hub functions are not supported. Supported Audio File Formats For and playback from a USB device, the AV receiver supports the following music file formats. Variable bit-rate (VBR) files are supported. (Playing times may not display correctly.) ■ MP3 (.mp3 or .MP3
  • Onkyo HT-RC330 | Owner Manual - Page 49
    Interface)*1, so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and displays, resulting in no picture.) The AV receiver uses HDCP (High-bandwidth Digital Content Protection)*2, so only HDCP-compatible components can display
  • Onkyo HT-RC330 | Owner Manual - Page 50
    REGZA-LINK compatible TV • Sharp TV ■ Players/Recorders • Onkyo and Integra Q-compatible players • speakers connected to the AV receiver. (A connection such as optical digital cable or similar is required above the HDMI cable.) • Input to the AV receiver can be selected with the remote controller
  • Onkyo HT-RC330 | Owner Manual - Page 51
    the input on the AV receiver. To output audio from the TV speakers, redo the operations on the TV. • Do not connect the V cable when connecting to the V and V audio control compatible components. • When you select anything other than the HDMI jack where the AV receiver is connected as the input
  • Onkyo HT-RC330 | Owner Manual - Page 52
    American) 3.3 A (Chinese) 330 W Stand-by Power Consumption Dimensions (W × H × D) (North American) 0.2 W (Chinese) 0.3 W 435 mm × 150 mm × 328 mm 17-1/8" × 5-7/8" × 12-15/16" Weight 7.5 kg (16.5 lbs.) ■ HDMI Input Output Video Resolution Audio Format Supported ■ Video Inputs IN 1, IN 2, IN
  • Onkyo HT-RC330 | Owner Manual - Page 53
    Memo En 53
  • Onkyo HT-RC330 | Owner Manual - Page 54
    Memo En 54
  • Onkyo HT-RC330 | Owner Manual - Page 55
    Memo En 55
  • Onkyo HT-RC330 | Owner Manual - Page 56
    ONKYO SOUND & VISION CORPORATION 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO EUROPE ELECTRONICS
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
AV Receiver
HT-RC330
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Introduction
...................................
2
Connections
.................................
10
Turning On & Basic Operations
......
17
Advanced Operations
.................
29
Controlling Other Components
...38
Appendix
......................................
43
E
n