Onkyo HT-RC330 Owner Manual - Page 16
Connecting Antenna, Connecting the Power Cord, North American models, Chinese models - any good
![]() |
View all Onkyo HT-RC330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Connecting Antenna This section explains how to connect the supplied indoor FM antenna and AM loop antenna. The AV receiver won't pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. Caution • Be careful that you don't injure yourself when using thumbtacks. North American models Chinese models Push. Insert wire. Release. Insert the plug fully into the jack. Assembling the AM loop antenna Insert the plug fully into the jack. Thumbtacks, etc. AM loop antenna (supplied) Indoor FM antenna (supplied) Note • Once your AV receiver is ready for use, you'll need to tune into a radio station and position the antenna to achieve the best possible reception. • Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords. Tip • If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead. • If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available outdoor AM antenna. Connecting the Power Cord 1 Plug the power cord into an AC wall outlet. Note • Before connecting the power cord, connect all of your speakers and AV components. • Turning on the AV receiver may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the AV receiver into a different branch circuit. En 16
![](/manual_guide/products/onkyo-htrc330-owner-manual-5b15f5d/16.png)