Onkyo HT-S5205 HTP-528 Instruction Manual - Page 10

Troubleshooting Symptom Possible cause Remedy There's no sound coming from certain speakers? The speaker cables are not connected properly. The speaker configuration is not set correctly. Check the speaker cables and correct as necessary. Check the speaker configuration. The subwoofer does not The power plug is not fully inserted into Insert the power plug fully into the wall turn on? the wall outlet. outlet. The OUTPUT LEVEL control is set to Turn up the OUTPUT LEVEL control. minimum. The subwoofer produces no sound? The RCA cable is not properly connected to the subwoofer's LINE INPUT. The level of the input signal was too low and the subwoofer entered Standby mode. Make sure that the RCA cable is properly connected to the subwoofer's LINE INPUT. Slightly increase the subwoofer pre out output level on your AV receiver. The Subwoofer configuration is not set Check the subwoofer setting in the speaker correctly. configuration on your AV receiver. The subwoofer produces The source material contain little or no Choose source material with more bass hardly any sound? bass content. content. A humming sound can be heard from the subwoofer? The RCA cable is not properly connected Make sure that the RCA cable is properly to the subwoofer's LINE INPUT. connected to the subwoofer's LINE INPUT. External interference from a TV or other Move the subwoofer and RCA cable away electronic device is being picked up. from the interference source. Make sure your audio system is grounded properly. En-10