Onkyo NR3007 Instruction Manual - Page 56

First Time Setup-Continued Digital Audio Input Setup If you connect a component to a digital input jack, you must assign that jack to an input selector. For example, if you connect your CD player to the OPTICAL IN1 jack, you should assign that jack to the CD input selector. By default, the COAXIAL IN1 jack is assigned to the DVD/ BD input selector, although this can be changed. Here are the default assignments. Input selector DVD/BD VCR/DVR CBL/SAT GAME AUX 1 AUX 2 TV/TAPE TUNER CD PHONO PORT Default assignment (TX-NR3007) (TX-NR5007) COAX1 COAX1 COAX2 COAX2 COAX3 COAX3 OPT1 OPT1 FRONT (Fixed) FRONT (Fixed) ----- ----- ----- OPT2 - - - - - (Fixed Fixed) OPT2 OPT3 ----- ----- ----- ----- 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 Use the Up and Down [R]/[X] but- tons to select "1. Input/Output Assign", and then press [ENTER]. The "Input/Output Assign" menu appears. 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input 4. Digital Audio Input 5. Analog Audio Input 3 Use the Up and Down [R]/[X] but- tons to select "4. Digital Audio Input", and then press [ENTER]. The "Digital Audio Input" menu appears. 1-4. Digital Audio Input DVD/BD VCR/DVR CBL/SAT GAME AUX 1 COAX1 COAX2 COAX3 OPT1 FRONT 4 Use the Up and Down [R]/[X] but- tons to select an input selector, and use the Left and Right [F]/ [S] buttons to select "COAX1", "COAX2", "COAX3", "OPT1", "OPT2", "OPT3" (TX-NR5007), or "- - - - - (analog)". • When an HDMI IN is assigned to an input selector in "HDMI Input Setup" on page 54, the AV receiver will select audio from HDMI IN as a priority. • Press the [ENTER] button when you do not use the signal of audio from the HDMI IN. The "* " mark is displayed like "COAX1* ". • "AUX 1" is used only for digital input from the front panel terminals. Examples: If you connect your DVD player to the OPTICAL IN 1 jack, set "DVD/BD" to "OPT1". If you want to listen to audio from the component connected to the OPTICAL IN 2 jack when the VCR/DVR input selector is selected, set "VCR/DVR" to "OPT2". If you want to listen to audio from the component connected to the COAXIAL IN 1 jack when the CBL/ SAT input selector is selected, set "CBL/SAT" to "COAX1". For input selectors that you don't want to assign a digital input jack, set to "- - - - - (analog)". 5 Press the [SETUP] button. The setup menu closes. Notes: • Available sampling rate for PCM signals from a digital input (optical and coaxial) is 32/44.1/48/88.2/ 96 kHz/16, 20, 24 bit. • If you connect an input component (such as UP-A1 Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector. • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 56