Onkyo TX-8555 Owner Manual - Page 12

Using the Remote Controller - receiver

Page 12 highlights

Remote Controller-Continued S RETURN button Selects the previously displayed setup menu. T PURE A button (25) Selects the Pure Audio listening mode. Note: • An Onkyo cassette recorder connected via can also be controlled in Receiver mode (see page "Controlling a Cassette Recorder" on page 43). Using the Remote Controller Point the remote controller toward the remote control sensor. Remote control sensor About 5 m (16 feet) Notes: • The remote controller may not work reliably if the receiver is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights. Keep this in mind when installing. • If another remote controller of the same type is used in the same room, or the receiver is installed close to equipment that uses infrared rays, the remote controller may not work reliably. • Don't put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries. • The remote controller may not work reliably if the receiver is installed in a rack behind colored glass doors. Keep this in mind when installing. • The remote controller will not work if there's an obstacle between it and the receiver's remote control sensor. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

12
Remote Controller
—Continued
S
RETURN button
Selects the previously displayed setup menu.
T
PURE A button (25)
Selects the Pure Audio listening mode.
Note:
An Onkyo cassette recorder connected via
can
also be controlled in Receiver mode (see page
“Controlling a Cassette Recorder” on page 43).
Point the remote controller toward the remote control
sensor.
Notes:
The remote controller may not work reliably if the
receiver is subjected to bright light, such as direct
sunlight or inverter-type fluorescent lights. Keep this
in mind when installing.
If another remote controller of the same type is used
in the same room, or the receiver is installed close to
equipment that uses infrared rays, the remote
controller may not work reliably.
Don’t put anything, such as a book, on the remote
controller, because the buttons may be pressed
inadvertently, thereby draining the batteries.
The remote controller may not work reliably if the
receiver is installed in a rack behind colored glass
doors. Keep this in mind when installing.
The remote controller will not work if there’s an obstacle
between it and the receiver’s remote control sensor.
Using the Remote Controller
Remote control sensor
About 5 m
(16 feet)