Onkyo TX-L50 User Manual English - Page 66
Miscellaneous
View all Onkyo TX-L50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary Information | Advanced Setup | Others USB Power Out at Standby Network Standby Bluetooth Wakeup Devices connected to the USB port are supplied with electricity even when this unit is in standby mode when this function is "On". (Default Value is "Off") 0 When using this feature, power consumption increases even when the unit is on standby, however, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only essential circuits are operating. When this feature is turned "On (Default Value)", you can turn on the power of the unit via the network using an application that can control this unit. 0 When "Network Standby" is used, the power consumption increases even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating. 0 "Network Standby", which suppresses power consumption, may be disabled when the network connection is lost. Use the power button on the remote controller or this unit to turn the unit on if this happens. This function wakes up the unit on standby by connecting a BLUETOOTH enabled device. "On": Use this function "Off (Default Value)": Do not use this function 0 Setting to "On" increases the power consumption even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating. 0 This setting is fixed to "Off" if "5. Hardware" - "Bluetooth" "Auto Input Change" is set to "Off". 0 Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It will appear when the network feature is started. 6. Miscellaneous E ˙ 1. Firmware Update N Update Notice Availability of a firmware update will be notified via network. "Enable (Default Value)": Notify updates "Disable": Do not notify updates Version The current firmware version will be displayed. Update via NET Press ENTER to select when you want to update the firmware via network. 0 You will not be able to select this setting if you do not have Internet access or there is nothing to update. Update via USB Press ENTER to select when you want to update the firmware via USB. 0 You will not be able to select this setting if a USB storage device is not connected or there is nothing to update in the USB storage device. 0 Wait for a while if "Firmware Update" cannot be selected. It will appear when the network feature is started. ˙ 2. Initial Setup You can make the Initial Setup from the Setup menu. 0 Wait for a while if "Initial Setup" cannot be selected. It will appear when the network feature is started. ˙ 3. Lock Setup Parameter Lock the Setup menu to protect the settings. "Locked": The menu is locked. "Unlocked (Default Value)": The menu is unlocked. 66