Onkyo TX-NR676E User Manual English Basic/Advanced - Page 43
Speaker, Configuration, Setting Item, Default Value, Setting Details
View all Onkyo TX-NR676E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. 2. Speaker You can make changes to the connection environment of the speakers and change the volume level. Settings are automatically configured if you use AccuEQ Room Calibration. This setting cannot be selected if headphones are connected or audio is output from the speakers of the TV. ˙ 1. Configuration Setting Item Speaker Channels Subwoofer Height Speaker Zone Speaker Default Value 7.1 ch Yes Top Middle No Setting Details Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", or "5.1.2 ch" to suit the number of speaker channels connected. Set whether a subwoofer is connected or not. "Yes": When subwoofer is connected "No": When subwoofer is not connected Set the speaker type if height speakers are connected to the SURROUND BACK or HEIGHT terminals. Select "Front High", "Top Front", "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Front)", or "Dolby Speaker (Surr)" according to the type and layout of the connected speakers. • If an item cannot be selected even though connection is correct, check that the settings in "Speaker Channels" matches the number of connected channels. Set the connection of speakers to Zone 2 speaker terminals. "Zone 2": When speakers are connected to Zone 2 speaker terminals "No": When speakers are not connected to Zone 2 speaker terminals Setting Item Bi-Amp Speaker Impedance Default Value No 6ohms Setting Details Set whether the front speakers are bi-amp connected. "No": When front speakers are not bi-amp connected "Yes": When front speakers are bi-amp connected • This item will be fixed to "No" when the "Zone Speaker" setting is "Zone 2". • This setting cannot be selected when surround back speakers or height speakers are installed. Set the impedance (Њ) of the connected speakers. "4ohms": When any of the connected speakers have 4 Њ or more to less than 6 Њ impedance "6ohms": When the connected speakers all have 6 Њ or more impedance. • For impedance, check the indications on the back of the speakers or their instruction manual. 11