Onkyo TX-NR747 Basics Guide - Page 17
Bluetooth, AM/FM Radio - bluetooth pairing
View all Onkyo TX-NR747 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4 Bluetooth® You can wirelessly enjoy music files stored in a smartphone or other Bluetooth-enabled device. The coverage area is 48 feet (15 meters). ●● The Bluetooth-enabled device needs to support the A2DP profile. ●● Note that connection is not always guaranteed with all Bluetooth-enabled devices. Pairing Pairing is necessary when connecting the Bluetoothenabled device for the first time. Before starting the procedure, learn how to enable the Bluetooth setting function and to connect with other devices on the Bluetooth-enabled device. 1. Press BLUETOOTH on the remote controller. The unit begins pairing and "Now Pairing..." is displayed. 2. While "Now Pairing..." is on the display, complete connection on the Bluetooth-enabled device in the nearby area within about 2 minutes. If the name of this unit is displayed on the Bluetoothenabled device's display, select this unit. Paring will end after a short time. ●● If a password is requested, enter "0000". ●● You can pair with another Bluetooth-enabled device by pressing and holding the BLUETOOTH button until "Now Pairing..." is on the display. This unit can store the data of up to 8 paired devices. Playing Bluetooth-enabled devices If the unit is on and the Bluetooth-enabled device is connected, the input will be automatically switched to BLUETOOTH. Play music in this state. ●● It may take about a minute until connection is established when the unit is on since the Bluetooth function takes some time to start up. ●● If the volume setting on the Bluetooth-enabled device is low, the sound will not be output from this unit. ●● Due to the characteristics of Bluetooth wireless technology, the sound produced on this unit may slightly be behind the sound played on the Bluetooth-enabled device. ●● The on-screen displays are not displayed when the OSD language is set to Chinese. Operate by confirming the display on the main unit. (European, Australian, Taiwanese and Asian models) 5 AM/FM Radio The Basic Manual explains the method using automatic tuning. For manual tuning, see the Advanced Manual. 1. Press TUNER on the main unit several times to select either "AM" or "FM". 2. Press TUNING MODE on the unit, so that the "AUTO" indicator on the display lights. 3. Press lTUNINGj on the unit. The automatic tuning to a radio station starts. Searching stops when one is tuned. When tuned into a radio station, the "cTUNEDd" indicator on the display lights. The "FM STEREO" indicator lights if the radio station is an FM radio station. TUNED AUTO FM STEREO Actual display varies depending on the country or the region Registering a radio station: You can register up to 40 of your favorite AM/FM radio stations. 1. Tune into the AM/FM radio station you want to register. 2. Press MEMORY on the unit so that the preset number on the display flashes. 3. Press dPRESETc on the unit several times to select a number between 1 and 40 while the preset number is flashing (about 8 seconds). 4. Press MEMORY again on the main unit to register the station. When registered, the preset number stops flashing. To select a preset radio station, press dPRESETc Step 3: Playing Back on the main unit or CH +/− on the remote controller. ●● To delete a preset station, after selecting the preset number you want to delete with dPRESETc on the main unit, press TUNING MODE while holding down MEMORY on the main unit. When the preset number is deleted, it disappears from the display. AM/FM frequency step setting It may be necessary for you to change the frequency step to tune the radio in your area. Change the step with the following procedure. Note that when this setting is changed, all radio presets are deleted. 1 After pressing RECEIVER on the remote controller, press SETUP. 2. Use the cursor buttons to select "6. Hardware" and press ENTER. 3. Select "Tuner" with the cursor and press ENTER. 4. Select "AM / FM Frequency Step" (North American and Taiwanese models) or "AM Frequency Step" (European, Australian and Asian models) with the cursor and select the frequency step for your area. (For Taiwanese models only) The setting is "10 kHz / 0.2 MHz" at the time of purchase. Please change it to "9 kHz / 0.05 MHz". En-17