Onkyo TX-NR900 Owner Manual - Page 7
IP Address Sub-menu, 2. Proxy Setup Sub-menu, 3. MAC Address Sub-menu - service manual
View all Onkyo TX-NR900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Configuring Various Settings 5-1. IP Address Sub-menu You can use this submenu to turn on/off the DHCP and Auto IP functionality. Also, you can use this menu to manually configure network settings. Referring to the documentation from your ISP, enter the IP address and subnet mask assigned to your TX-NR900/900E as well as the IP addresses of the default gateway and DNS server. After necessary settings complete, press the RETURN button to go back to "5. Network Setup Menu", select "→ Save Settings", and press the ENTER button to save the setting you made. When you set a.DHCP/AUTO IP to Off, select an menu item under b. and press the ENTER or button, the TX-NR900/900E enters the number-entry mode. Select a number using the / buttons, and press the ENTER button to enter the number. After all the necessary numbers are entered, the TX-NR900/900E exits the number-entry mode. a. DHCP/AUTO IP Sets whether the network setting is configured automatically or not. On: The network setting will be configured automatically. When you set this option to On, the values for b. through f. will be assigned using DHCP. Off: The network setting is configured manually. b. IP Address You will enter this value when you set the a.DHCP/AUTO IP setting above to Off. Enter the IP address assigned to your TX-NR900/900E. If your TXNR900/900E is directly connected with an xDSL modem or terminal adapter, be sure to enter the static IP address exactly as specified by your ISP. Specify the IP address within the range below. The Net-Tune Central cannot be used with the IP addresses out of the ranges below. CLASS A: 10.0.0.0-10.255.255.255 CLASS B: 172.16.0.0-172.31.255.255 CLASS C: 192.168.0.0-192.168.255.255 Because the most of the routers commercially available is set to the CLASS C IP address, specify the CLASS C IP address for the TXNR900/900E. c. SUBNET Mask You will enter this value when you set the a.DHCP/AUTO IP setting above to Off. Enter the subnet mask. If your TX-NR900/900E is directly connected with an xDSL modem or terminal adapter, be sure to enter the subnet mask exactly as specified by your ISP. Usually, enter 255.255.255.0 here. d. Gateway You will enter this value when you set the a.DHCP/AUTO IP setting above to Off. Enter the IP address of the default gateway. If your TX-NR900/900E is directly connected with an xDSL modem or terminal adapter, be sure to enter the gateway address exactly as specified by your ISP. If your TXNR900/900E is connected to a gateway/router, enter the IP address of the gateway/router. DNS Server e. 1st f. 2nd You will enter this value when you set the a.DHCP/AUTO IP setting above to Off. Enter the IP address of the DNS server. If your TX-NR900/900E is directly connected with an xDSL modem or terminal adapter, be sure to enter the DNS address exactly as specified by your ISP. When your Internet service provider provides only one DNS address with you, enter this address into "e.1st". When two or more DNS addresses are provided, enter two of them into "e.1st" and "f.2nd" respectively. Note: After setting, allow approx. 2 seconds until the TX-NR900/900E stores all of the data in the memory. Be sure not to turn off the power during that time otherwise the data will be lost. 5-2. Proxy Setup Sub-menu Configure this item if your TX-NR900/900E uses a proxy server to connect to the Internet. Enter the proxy server settings exactly as specified by your ISP. After necessary settings complete, press the RETURN button to go back to "5. Network Setup Menu", select "→ Save Settings", and press the ENTER button to save the setting you made. a. Proxy Server Sets whether the TX-NR900/900E connects to Internet radio station through proxy server or not. On: Connects to Internet radio station through Proxy Server. Off: Connects to Internet radio station without Proxy Server. b. Proxy Address Enter the domain name of the proxy server. When you set a.Proxy Server to On, select this menu item and press the ENTER or button, the TX-NR900/900E enters the character-entry mode. Select a character using the / / / buttons, and press the ENTER button to enter the character. After all the necessary characters are entered, the TX-NR900/900E exits the character-entry mode. c. Proxy Port Enter the port number of the proxy server. When you set a.Proxy Server to On, select this menu item and press the ENTER or button, the TX-NR900/900E enters the number-entry mode. Select a number using the / / / buttons, and press the ENTER button to enter the number. After all the necessary numbers are entered, the TX-NR900/900E exits the number-entry mode. Note: After setting, allow approx. 2 seconds until the TX-NR900/900E stores all of the data in the memory. Be sure not to turn off the power during that time otherwise the data will be lost. 5-3. MAC Address Sub-menu You can view the assigned MAC address. Every network port is identified by a unique MAC address. (This is read-only information.) a. MAC Address Displays the MAC address assigned to your TX-NR900/900E. 7