Onkyo TX-RZ710 User Manual - Page 17
if you connect, ZONE 2 PRE/LINE OUT
View all Onkyo TX-RZ710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
> Before start > Hookup > Setup > Playback > Part Names 1 Analog audio cable if you connect : ZONE 2 PRE/LINE OUT You can enjoy 2ch audio in the separate room through speakers connected to a pre-main amplifier or power amplifier by, for example, playing a Blu-ray Disc player in 7.1 ch in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2). ZONE 2 PRE/LINE OUT Connect the ZONE 2 PRE/LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier or power amplifier in a separate room with an analog audio cable. Connections with an AV component Connect with HDMI IN 1 to 3 if you want to output an MAIN ROOM external AV component to ZONE 2. If the AV component doesn't have an HDMI jack, connect using a digital optical cable, digital coaxial cable, or analog audio cable. If any of these are already used, you do not have to connect ZONE2 using any of the others. Setup 0 Settings are required in Initial Setup, "4. Multi Zone Setup" (P21) to enjoy this feature. 0 The audio from externally connected AV components can only be output when the audio is analog or 2ch PCM audio signals. If you have 1 LINE connected to this unit with an HDMI cable or digital IN optical/coaxial cable, may be necessary to convert the audio output of the AV component to PCM output. ZONE2 PRE/LINE OUT 17