Onkyo TX-SR494 Owners Manual - English - Page 86

Contents ≫ Connections ≫ Playback ≫ Setup ≫ Troubleshooting „„Tuner 92 „„BLUETOOTH function 92 Before starting the procedure „„ZONE B function 93 Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, „„Remote Controller 93 setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the „„Display 93 HDMI linked operation does not work, disconnecting/connecting the HDMI cable „„Others 93 may solve it. When reconnecting, be careful not to wind the HDMI cable since if wound the HDMI cable may not fit well. After reconnecting, turn off and on the unit and the connected device. • The AV receiver contains a microPC for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least 5 seconds, and then plug it back in. • Our company is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit's malfunction. Before you record important data, make sure that the material will be recorded correctly. When the unit is operating erratically 87 Try restarting the unit 87 Resetting the unit (this resets the unit settings to the default) 87 Troubleshooting 88 „„Power 88 „„Audio 88 „„Listening Modes 90 „„Video 91 „„Linked operation 91 86 Front Panel≫ Rear Panel≫ Remote≫