Onkyo TX-SR702 Owner Manual - Page 72
Assigning Listening Modes to Input, Sources
View all Onkyo TX-SR702 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
59/3 @&OCPPL 1BHF 5VFTEBZ 4FQUFNCFS 1. Advanced Setup-Continued 4-9. Theater-Dimensional These settings apply to the Theater-Dimensional listening mode. ■ a. Listening Angle With this setting, you can specify the angle of the front left and right speakers relative to the listening position. Processing for the Theater-Dimensional listening mode is based on this setting. Ideally, the front left and right speakers should be equidistant from the listening position and at an angle close to one of the two available settings. Front left speaker Front right speaker 20/40˚ Assigning Listening Modes to Input Sources You can assign a default listening mode to each input source that will be selected automatically when you select each input source. For example, you can set the default listening mode to be used with Dolby Digital input signals. You can select other listening modes during playback, but the mode specified here will be resumed once the AV receiver has been set to Standby. 1 RECEIVER Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen. 20º: Select if the listening angle is 20 degrees. 40º: Select if the listening angle is 40 degrees (default). ■ b. Center With this setting, you can specify whether or not you're using a center speaker. If you are, the center channel sound will be output by the center speaker when using the Theater-Dimensional listening mode. This reduces the workload of the front left and right speakers, and creates a more articulate sound space. In this case, the settings for the distance between the listening position and each speaker, and the level of each speaker are important, but making these settings is a breeze with the Automatic Speaker Setup function (see page 39). On: Select if using a center speaker. Off: Select if not using a center speaker (default). ■ c. Front Expand With the Front Expander function, you can broaden the width of the front stereo image. This can be useful with narrow listening angles of 20 degrees or less. On: Front Expander function on. Off: Front Expander function off (default). ■ d. Dialog Enhance With this function, you can improve the clarity of the center channel, which usually contains dialog. On: Dialog Enhance function on. Off: Dialog Enhance function off (default). ■ e. Virtual Surr Level With this setting, you can adjust the level of virtual surround sound from -3 dB to +3 dB (default is 0 dB). If the clarity is poor, or the effect sounds unnatural, you may be able to improve it by lowering this setting. 2 ENTER ENTER 3 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "5. Listening Mode Preset," and then press [ENTER]. The Listening Mode Preset menu appears. Menu Ba5s.iLcisSteetnuipng Mode Preset 1-.-I-n-i-t-i-a-l--S-e-t-u-p---------2.1S.pDeVaDk/eMrULSTeItCuHp 2.VIDEO1 Adv3a.nVcIeDdEOS2etup 3.4S.uVrIrDoEuOn3d Setup 4.5A.uVdIiDoEOA4djust 56..67LP..irTTseAUtfPNeeEEnrRienngceMode Preset 8.CD 9.PHONO Use the Up and Down [ ]/[ ] buttons to select the input selector that you want to set, and then press [ENTER]. 5-1.ListeningModePreset ----- DVD/MULTICH ------ a.Ana/PCM :Last Valid b.Dolby D :Last Valid c.DTS :Last Valid d.D.F.2ch :Last Valid e.d.f.Mono:Last Valid f.Multiplex :Last Valid g.Multich :Last Valid For input selectors that have no digital input jacks, only "a. Analog" will be available. 72