Onkyo TX SR703 Owner Manual - Page 33
Connecting a CD Player, Connecting a Turntable
View all Onkyo TX SR703 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
5943@&OCPPL 1BHF 'SJEBZ "VHVTU Connecting Your Components-Continued Connecting a CD Player Step 1: Choose a connection that matches your CD player ( a , b , or c ), and then make the connection. b COAXIAL IN 2 c OPTICAL IN 3 a IN L R CD Connect one or the other COAXIAL OUT OPTICAL OUT L R AUDIO OUT CD player • With connection a , you can listen to and record audio from the CD player and listen in Zone 2. • To connect the CD player digitally, use connection b or c . (For recording, use a and b , or a and c .) Connection a b c AV receiver CD IN L/R DIGITAL COAXIAL IN 2 DIGITAL OPTICAL IN 3 Signal flow ⇐ ⇐ ⇐ CD or turntable Analog audio L/R output Digital coaxial output Digital optical output Connecting a Turntable The AV receiver's PHONO IN is for use with a moving magnet (MM) type cartridge. Use an analog audio cable to connect the AV receiver's PHONO IN L/R jacks to the audio output on your turntable. Notes: • If your turntable has a ground wire, connect it to the AV receiver's GND screw. With some turntables, connecting the ground wire may produce an audible hum. If this happens, disconnect it. • If your turntable has a moving coil (MC) type cartridge, you'll need a commercially available MC head amp or MC transformer. Connect your turntable to the head amp or transformer, and connect that to the AV receiver's PHONO IN L/R jacks. • You can also use a phono equalizer to connect a turntable with an MC-type cartridge. See the phono equalizer's manual for details. IN L R PHONO AUDIO OUTPUT L R 33