Onkyo TX SR803 Owner Manual - Page 98

5943@%*(GN 1BHF  5IVSTEBZ "VHVTU System Hookup 1 Connecting Your Speakers The AV receiver's positive (+) speaker terminals are color-coded for easy identification. (The negative (-) speaker terminals are all black.) Speaker terminal Color Front left White Front right Red Center Green Surround left Blue Surround right Gray Surround back left Brown Surround back right Tan The supplied speaker labels are also color-coded and you should attach them to the positive (+) side of each speaker cable in accordance with the above table. All you need to do then is to match the color of each label to the corresponding speaker terminal. Connecting a Powered Subwoofer Using a suitable cable, connect the AV receiver's SUBWOOFER PRE OUT to an input on your powered subwoofer, as shown. If your subwoofer is unpowered and you're using an external amplifier, connect the SUBWOOFER PRE OUT to an input on the amp. Note: Make sure the plug is pushed in all the way. Powered subwoofer LINE INPUT LINE INPUT Connecting Speaker Set A 1 Unscrew the terminal. 2 Fully insert the bare wire, making sure that it's touching the center of the terminal. 3 Screw the terminal tight. Front right speaker Center speaker Front left speaker Surround back right speaker Surround back left speaker Surround right speaker Surround left speaker 2