Onkyo TX-SR876B Owner Manual - Page 104
Press the [RECEIVER] REMOTE, tons to select 6. THX Audio
View all Onkyo TX-SR876B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Advanced Setup-Continued THX Audio Setup 4 These settings are not set automatically by the Automatic Speaker Setup function (see page 64). With the "SurrBack Sp Spacing" setting, you can specify the distance between your surround back speakers. This setting is used by Speakers A and Speakers B. If you're using a THX-certified subwoofer, set the "THX Subwoofer" setting to "Yes". You can then apply THX's Boundary Gain Compensation (BGC) to compensate the perceived exaggeration of low frequencies for listeners sitting very close to a room boundary (i.e., wall). You can also set the THX Loudness Plus feature "On" or "Off". When the "Loudness Plus" is set to "On", it is possible to enjoy even subtle nuances of audio expression at low volume. This result is only available when the THX listening mode is selected. 1 Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 5 2 Use the Up and Down [R]/[X] but- tons to select "2. Speaker Setup", and then press [ENTER]. The "Speaker Setup" menu appears. 2. Speaker Setup 1. Speaker Settings 2. Speaker Config 3. Speaker Distance 4. Level Calibration 5. Equalizer Settings 6. THX Audio Setup MOVE ENTER ENTER RETURN RETURN SETUP EXIT 6 3 Use the Up and Down [R]/[X] but- tons to select "6. THX Audio Setup", and then press [ENTER]. The "THX Audio Setup" screen appears. 2-6. THX Audio Setup SurrBack Sp Spacing > 4ft THX Subwoofer Yes BGC Off Loudness Plus On Preserve THX Settings - - - 104 MOVE VALUE RETURN RETURN SETUP EXIT When "Loudness Plus" is set to "Off", the "Preserve THX settings" can be selected. Use the Up and Down [R]/[X] buttons to select "SurrBack Sp Spacing", and use the Left and Right [F]/[S] buttons to specify the distance between your surround back speakers: > 4ft (>1.2m) (Default): Select this if your surround back speakers are more than 4 feet (1.2 m) apart. < 1ft (< 0.3m): Select this if your surround back speakers are between 0 and 1 foot (0-30 cm) apart. 1ft- 4ft (0.3m-1.2m): Select this if your surround back speakers are between 1 and 4 feet (0.3-1.2 m) apart. Note: Cannot be set if "SurrBack Ch" is set to "2ch" (page 96), "Speaker Type: Front(Speaker A) or Front(Speaker B)" is set to "Bi-Amp" or "BTL" (page 61), "SurrBack" is set to "None" (page 96) or "Not Use" (page 98), or "Powered Zone2" is being used (page 132). Use the Up and Down [R]/[X] buttons to select "THX Subwoofer", and use the Left and Right [F]/[S] buttons to select: No: Select this if you do not have a THX-certified subwoofer. Yes: Select this if you have a THXcertified subwoofer. Use the Up and Down [R]/[X] buttons to select "BGC", and use the Left and Right [F]/[S] buttons to select: Off: Select this to turn off BGC. On: Select this to turn on BGC. Note: This setting is only available if "THX Subwoofer" is set to "Yes" (step 5).