Onkyo VC-GX30W Owners Manual - Page 3

Connect & Initial Setup Power Cord Hookup This unit includes a removable power cord. Connect the power cord to AC IN of the unit and then connect to the outlet. Always disconnect the outlet side first when disconnecting the power cord. 1 2 Initialize Initialize the settings of the unit to return the settings to the status at the time of purchase. Press and hold the microphone mute button for 10 seconds to initialize the unit. The LED indicators flash as follows when initializing is started. Download the Google Home app Use the Google Home app to setup the unit and operate it. Download the Google Home app from Google Play or the App Store to your smartphone or tablet. 0 Google Home app can be used on the following operating systems. (As of September 2017) AndroidTM: Android 4.2 or later iOS: iOS 8.0 or later (supported on iPhone®, iPad®, and iPod touch®) 1 2 It takes about 20 seconds to initialize. The LED indicators turn off when initializing is finished, and the settings return to the default settings. 8J'J The smartphone or tablet needs to be connected to the same network as this unit to setup and operate the unit. Check network connection beforehand. Initial Setup Perform the following procedure when the unit is on. 1. Start the Google Home app. When you tap "ACCEPT" for the terms of service and privacy policy, the network connection between this unit and the smartphone is initiated. Follow the on-screen instructions to complete the initial settings. 2. You can select a tutorial which lets you practice using your Google Assistant once initial settings are complete. Refer to "Meet your Google Assistant" (P4) for information on your Google Assistant. Note: Your device may download and apply an Over-the-Air software update during installation. This is normal. Please be patient while your device is updated to enjoy the latest Google Chromecast built-in and Google Assistant features. En 3