Optoma BE Free5 BE Free5 User Manual - Page 8

Pairing additional devices with your BE Free5 To pair additional devices to your BE Free5 ensure that your BE Free5 is not connected to any device then repeat the steps 1,2,3 outlined above. Note: If your BE Free5 have already been paired with eight devices and a ninth device is paired, the stored information for the very first device will be deleted. Pairing BE Free5 Right earpiece with Left earpiece Turns on both earpieces and insert them in your ear, both earpieces will automatically connected. You will hear voice prompt "Paired". Each unit of BE Free5 are paired in the factory. However, when pairing information is lost, you can follow procedure to restore the pairing information: 1. When the right earpiece is in pairing mode, tap the MFB continuously three times. The LED should flash orange/white slowly. 2. Then press on left earpieces MFB for 10 seconds from power-off state. The LED will also flash orange/white. Wait for few seconds to allow both earpieces to pair. Once pairing is complete the LED on both earpieces' will flash in white. NOTE: A. If the earpiece is left inactive in pairing mode, your BE Free5 will automatically power off after 10 minutes. B. Your BE Free5 can store pairing information for up to eight devices. 7