Optoma BX-AL133 User Manual - Page 10
Remote Control and Motor Operation
View all Optoma BX-AL133 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
User's Manual BX-AL133 Remote Control and Motor Operation The LED indicator on the sled will glow when the unit is ON, and flash when any button is pressed. It will also flash when the lens is in motion. The LED will be off in standby mode. Buttons: 8-Button Remote Control OFF - Puts the sled in standby mode. ON -Turns the sled from standby to ON. OFF ON LENS OUT LENS IN PANEL OFF PANEL ON LENS OUT - Commands the lens to move into the LENS OUT position. Holding the button for several seconds re-programs the current position as the new LENS IN position. The lens sled will acknowledge the request by flashing the LED and moving the lens to the new LENS OUT position (the opposite side). LENS IN - Commands the lens to move into the LENS IN position (as configured in Setup). SLOW FAST PANEL OFF - Turns the logo backlight off. PANEL ON - Turns the logo backlight on. SLOW - Sets the acceleration/deceleration and maximum speed for slow (low inertia) traversal. FAST - Sets the acceleration/deceleration and maximum speed for rapid traversal. For more information, please visit our website at: http://www.OptomaUSA.com User's Manual | 10