Optoma DX617 User's Manual - Page 56
Intermission Problems, Image has slanted sides, Image is reversed
View all Optoma DX617 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Appendices Image has slanted sides v Use of Keystone is not recommended. 4 If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. 4 Press [Keystone +/-] on the remote control until the sides are vertical. Image is reversed 4 Select Setup | Projection from the OSD and adjust the projection direction. Intermission Problems The projector stops responding to all controls 4 If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before reconnecting power. Lamp burns out or makes a popping sound 4 When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in Replacing the Lamp on page 60. English 56