Optoma EH200ST User's Manual - Page 18
Powering off the projector, On/Standby LED lights solid Amber,
View all Optoma EH200ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installation Powering off the projector 1. Press the " " button on the remote control or " " on the Keypad to turn off the projector. The following message will be displayed on the screen. Power Off? Press Power again Press the " " button again to confirm otherwise the message will disappear after 15 seconds. When you press the " " button for the second time, the projector will display countdown timer and will shut down. 2. The cooling fans continue to operate for about 10 seconds for cooling cycle and the On/Standby LED will Flash Green. When the On/Standby LED lights solid Amber, the projector has entered standby mode. If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press " " button to restart the projector. 3. Disconnect the power cord from the electrical outlet and the projector. 4. Do not turn on the projector immediately following a power off procedure. English 18