Optoma EP610H User Manual - Page 14

English 14 OSD Menus How to operate 4The Projector has the multilingual On-Screen Display(OSD) menus that allows you to make image adjustments and change a variety of settings. When in computer source, the OSD will be the "Computer OSD". When in Video source, the OSD will be the " Video OSD". The projector will detect the source automatically. 4To open the OSD menus, press the "Menu" button on the Remote Control or Panel Control. 4To select among different menus, press the" Menu" buttn again. Then use "Up"& "Down" keys to select different items and use "Right" & "Left" to adjust your selection. 4To exit the OSD, press the "Freeze/CLR" button or choose the "Exit Menu" and press "Enter" button. Language 4Language You can display the multilingual OSD . User " Up" and " Down" key to select. The menus redrew immediately. Display 4Brightness Adjusting the brightness of the image. l Press the left key to darken the image. l Press the right key to lighten the image. 4Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast to change the amount of black and white in the image. l Press the left key to decrease the contrast. l Press the right key to increase the contrast 4Keystone Correction Adjusts image distortion caused by tilting the projector. 4Color Temperature Adjusts the color temperture. The range is from 5000°K to 9300°K . The factory default is 7900°K . With the higher temperature, the screen looks colder; with the lower temperature, the screen looks warmer.