Optoma EP910 User Manual - Page 28

Auto Shutdown, VGA Out, Lamp Hours, Lamp Reminding, Reset Lamp Hours, Factory Default - replacement lamp

Page 28 highlights

User Controls Auto Shutdown Sets the interval of power-off of the system, if there is no signal input. (In minutes). The projector will power down automatically if there is no signal. Auto shut down sets the delay time. VGA Out Choose the source for the VGA loop throught output, VGA or DVI. Lamp Hours Display the cumulative lamp operating time. Lamp Reminding Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before end of life. Reset Lamp Hours Reset the lamp life hour counter after replacing the lamp. Factory Default Choose "Enter" to return the display parameters on all menus to the factory default settings. English 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

28
English
User Controls
Auto Shutdown
Sets the interval of power-off of the system, if there is no signal
input. (In minutes).
The projector will power down automatically if
there is no signal. Auto shut down sets the delay time.
VGA Out
Choose the source for the VGA loop throught output, VGA or DVI.
Lamp Hours
Display the cumulative lamp operating time.
Lamp Reminding
Choose this function to show or to hide the warning message when
the changing lamp message is displayed. The message will appear
30 hours before end of life.
Reset Lamp Hours
Reset the lamp life hour counter after replacing the lamp.
Factory Default
Choose “Enter” to return the display parameters on all menus to the
factory default settings.