Optoma GB-200 User Manual - Page 18
Step 2, Generic
View all Optoma GB-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Step 2: 【Generic】Settings 1. Select【Resolution】 :XGA/WXGA/1080P/WUXGA 2. Select【Input source port 】:HDMI or DVI 3. Editing 【IP address 】at this channel that should be as same as one of IP address at rear panel of GB-200 BOX and click【Connect】to link 4. After the channel network is linked well with green hook on the icon of channel ,Clicking 【Synchronize】to load default setting at AP into Box 5. Repeat Step 1 and Step 2 to create other channel's settings for control
Step 2:
【
Generic
】
Settings
1.
Select
【
Resolution
】
:XGA/WXGA/1080P/WUXGA
2.
Select
【
Input source port
】
:HDMI or DVI
3.
Editing
【
IP address
】
at this channel that should be as same as one of IP address at
rear panel of GB-200 BOX and click
【
Connect
】
to link
4.
After the channel network is linked well with green hook on the icon of channel
,Clicking
【
Synchronize
】
to load default setting at AP into Box
5.
Repeat Step 1 and Step 2 to create other channel’s settings for control