Optoma H55 User Manual - Page 25

Changing the lamp - bulb

Get Optoma H55 PDF manuals and user guides View all Optoma H55 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

English Appendices Changing the lamp Warning : Lamp compartment is hot! Allow it to cool down before changing lamp! The projector will detect the lamp life itself. It will show you a warning message "Lamp is running out of standard lifetime. Be sure to replace the lamp as soon as possible." When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. 4 Lamp Changing Procedure: 1. Turn off the power to the projector by pressing the Power/Standby button. 2. Allow the projector to cool down at least 30 minutes. 3. Turn off the main power switch. 4. Disconnect the power cord. 5. Use screwdriver to remove the screw from the cover.Œ 6. Remove the cover. 7. Remove the 3 screws from the lamp module.Ž 8. Pull out the lamp module. To replace the lamp module, reverse the previous steps. 2 1 Warning : To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. 4 3 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
E
nglish
25
Changing the lamp
The projector will detect the lamp life itself.
It will show you a
warning message “Lamp is running out of standard lifetime. Be sure
to replace the lamp as soon as possible.” When you see this message,
change the lamp as soon as possible.
Make sure the projector has been cooled down for at least 30
minutes before changing the lamp.
Warning :
Lamp compartment
is hot!
Allow it to cool down
before changing lamp!
4
Lamp Changing Procedure:
1.
Turn off the power to the projector by pressing the Power/Standby button.
2.
Allow the projector to cool down at least 30 minutes.
3.
Turn off the main power switch.
4
.
Disconnect the power cord.
5.
Use screwdriver to remove the screw from the cover.
±
6.
Remove the cover.
²
7.
Remove the 3 screws from the lamp module.
³
8.
Pull out the lamp module.
´
Warning :
To reduce the risk of
personal injury, do not drop the
lamp module or touch the lamp
bulb. The bulb may shatter and
cause injury if it is dropped.
Appendices
To replace the lamp module, reverse the previous steps.
2
3
4
1