Optoma H56 User Manual - Page 11
Powering On/Off the Projector - projector lamp
View all Optoma H56 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English Installation Powering On/Off the Projector Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. 3. Turn on the main power switch on the side of the projector and allow the projector to warm up for 1-2 minutes. 4. Turn on the lamp by pressing Power/Standby button on the control panel. The startup screen will display and count down for 20 seconds and thePower/Standby indicator will light solid amber. The LAMP LED indicator will light solid green. 5. Turn on your source (computer, notebook, or video player , etc...) The projector will detect your source automatically. v If the screen displays No Signal , please make sure the signal cables are securely connected. v If you connect multiple sources at the same time, use the Source button on the Remote Control or Panel Control to switch. vTurn on the projector first and then the signal sources. 3 Power / Standby Lens cap 1 11 2 Power Switch