Optoma Pico PK301 User's Manual - Page 4

VGA/C - projector

Get Optoma Pico PK301 PDF manuals and user guides View all Optoma Pico PK301 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

PUSH Charging the Battery 1 2 㕣 4 1. Remove protection cap and insert the plug. () 2. Connect the charger. (~) 3. D uring charging the LED indicator lights red. () Projector will not charge while operating. 4. The LED Charge Indicator will turn green when battery is fully charged. This process may take up to3 hours 1. For more LED indicator, see page 7. 2. Before using the first time, charge until battery indicator turns green. 3. After the projector is turned off, the battery may not start charging right away due to the high temperature emitted by the projector. Connect VGA/Componet source - (Video in) 1. Connect the AV input source. (~) 2. After powering on the projector, press "Auto Search Source 㕡 Button" to change sources. 3. Connect earphones or amplified external speakers to the audio out 㕢 connector of the projector (  ) or 1. All other brand and product names are trademarks or registered trademarks of their 㕡 respective companies. 2. The connecting cable of video output device is not supplied, please contact their service center. 3. iPod nano/iPod touch/iPhone/iPod classic (version 5 and above) 4. Designed for iPod/iPhone/Mobile phone/ PMP with TV out functions. Using with 㕢 device with audio signal voltage > 0.3Vrms is not recommended. or or 㕡 㕣 㕢 VGA/C Connect VGA/Componet source - (VGA/USB/HDMI/Component in) Connect omponet source Data transfer 㕡 㕢 㕡 㕢 CONNECT INPUT SOURCE 1. Connect the VGA/Component source device with the Universal I/O connector. Insert universal connector with arrow mark facing up. 2. After powering on the projector, or press "Auto Search Source Button" to change sources. 1. USB device: Support USB Flash Drive up to 5V/150mA, but does not support USB Hard Disk Drive 2. Female USB cable, Component cable, and HDMI cable are optional accessories. 㕡 㕢 MOLEX 1. Connect laptop or PC for data transfer to the Projector internal memory or additional MicroSD memory using the supplied Male USB Cable. When connected, switch the Projector on. The laptop/PC can only detect the input source when the Projector is switched on. The projection will stop when this connection is made. 㕡 㕢 or CONNECT HDMI SOURCE 1. Connect the HDMI source device to the mini HDMI conne connector. (~) 2. After powering on the projector, press "Auto Search Source Insert MicroSD Card Button" to change sources. or CONNECT USB SOURCE 1. Connect the USB flash drive to the micro USB port using the female 㕡 USB cable. (~) RAM2. Select USB Flash Drive from 㕢 the Main Menu. 1. Insert a MicroSD card into the slot with the gold contacts facing down. 2. SReAMlect MicroSD Card from the Main Menu. MicroSD card is optional. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
4
2
PUSH
1
1. Remove protection cap and insert
the plug. (
)
2. Connect the charger. (
~
)
3. During charging the LED indicator
lights red. (
)
Projector will not charge while
operating.
4. The LED Charge Indicator will turn
green when battery is fully charged.
This process may take up to3 hours
4
C
HARGING
THE
B
ATTERY
3
1
2
3
C
ONNECT
VGA/C
OMPONET
S
OURCE
- (V
IDEO
IN
)
1
2
1
2
or
or
or
1. Connect the AV input source.
(
~
)
2. After powering on the projector,
press
"Auto Search Source
Button" to change sources.
3. Connect earphones or amplified
external speakers to the audio out
connector of the projector (
)
<Note>
1. All other brand and product names are
trademarks or registered trademarks of their
respective companies.
2. The connecting cable of video output
device is not supplied, please contact their
service center.
3. iPod nano/iPod touch/iPhone/iPod classic
(version 5 and above)
4. Designed for iPod/iPhone/Mobile phone/
PMP with TV out functions. Using with
device with audio signal voltage > 0.3Vrms
is not recommended.
C
ONNECT
VGA/C
OMPONET
S
OURCE
-
(VGA/USB/HDMI/C
OMPONENT
IN
)
1
2
1
2
<Note>
1. For more LED indicator, see page 7.
2. Before using the first time, charge until
battery indicator turns green.
3. After the projector is turned off, the battery
may not start charging right away due to the
high temperature emitted by the projector.
C
ONNECT
VGA/C
OMPONET
S
OURCE
D
ATA
TRANSFER
<Note> The laptop/PC can only detect the
input source when the Projector is switched on.
The projection will stop when this connection is
made.
1
2
1
2
or
CONNECT INPUT SOURCE
1. Connect the VGA/Component
source device with the Universal I/O
connector.
Insert universal connector with
arrow mark facing up.
2. After powering on the projector,
press
"Auto Search Source
Button" to change sources.
1. Connect laptop or PC for data
transfer to the Projector internal
memory or additional MicroSD
memory using the supplied Male
USB Cable. When connected,
switch the Projector on.
1
2
CONNECT HDMI SOURCE
1. Connect the HDMI source device
to the mini HDMI conne connector.
(
~
)
2. After powering on the projector,
press
"Auto Search Source
Button" to change sources.
CONNECT USB SOURCE
1. Connect the USB flash drive to the
micro USB port using the female
USB cable. (
~
)
2. Select
USB Flash Drive from
the Main Menu.
I
NSERT
M
ICRO
SD C
ARD
1. Insert a MicroSD card into the
slot with the gold contacts facing
down.
2. Select
MicroSD Card from
the Main Menu.
<Note> MicroSD card is optional.
or
or
<Note>
1. USB device: Support USB Flash Drive
up to 5V/150mA, but does not support USB
Hard Disk Drive
2. Female USB cable, Component cable,
and HDMI cable are optional accessories.