Optoma S343 S343 User Manual - Page 95
Warning indicators, LED lightning messages
View all Optoma S343 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
ADDITIONAL INFORMATION Warning indicators When the warning indicators (see below) light up or flash, the projector will automatically shutdown: "LAMP" LED indicator is lit red and if "On/Standby" indicator flashes red. "TEMP" LED indicator is lit red and if "On/Standby" indicator flashes red. This indicates the projector has overheated. Under normal conditions, the project can be switched back on. "TEMP" LED indicator flashes red and if "On/Standby" indicator flashes red. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up or flash, please contact your nearest service center for assistance. LED lightning messages Message Standby state (Input power cord) Power on (Warming) Power on & Lamp lighting Power off (Cooling) Quick Resume (100 secs) Error (Lamp fail) Error (Fan failure) Error (Over Temp) Power LED (Red) Steady light Flashing Flashing Flashing Power LED (Green or Blue) Temp-LED (Red) Flashing (0.5 sec off / 0.5 sec on) Steady light Flashing (0.5 sec off / 0.5 sec light). Back to red steady light when cooling fan turns off. Flashing (0.25 sec off / 0.25 sec on) Flashing Steady light Lamp-LED (Red) Steady light Power off: Power Off Power Off? Press power key again. Lamp warning: Warning Lamp Warning Lamp life exceeded. English 95