Optoma TX635-3D User's Manual - Page 14
Powering off the projector, Warning Indicator, Flash Green. When the POWER/STANDBY LED lights
View all Optoma TX635-3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Powering off the projector 1. Press the " " button on the remote control or on the control panel to turn off the projector. The following message will be displayed on the screen. Press the " " button again to confirm otherwise the message will disappear after 15 seconds. When you press the " " button for the second time, the fans will speed up to cool down the projector and will shut down in 10 seconds. During this time, the led will flash green. 2. The cooling fans continue to operate for about 10 seconds for cooling cycle and the POWER/STANDBY LED will Flash Green. When the POWER/STANDBY LED lights solid Amber, the projector has entered standby mode. If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press " " button to restart the projector. 3. Only disconnect the power cord when the projector is in standby mode (solid amber led). Warning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: Contact the nearest service center if the "LAMP" LED indicator is lit red and if "POWER/STANDBY" indicator flashes amber. projector displays these symptoms. See pages 80-81 for more information. "TEMP" LED indicator is lit red and if "POWER/STANDBY" indicator flashes amber. This indicates the projector has overheated. Under normal conditions, the projector can be switched back on. "TEMP" LED indicator flashes red and if "POWER/STAND- BY" indicator flashes amber. English 14 Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up again, please contact your nearest service center for assistance.