Optoma TX665UST-3D User's Manual - Page 72
The projector stops responding to all controls, Image is out of focus
View all Optoma TX665UST-3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Appendices Image is out of focus Make sure the lens cap is removed. Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance. See page 18. The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the projector will show the best image when the projector display mode is set to 16:9 in the OSD. If you play 4:3 format DVD titles, please change the format to 4:3 in the projector OSD. If the image is still stretched, you will also need to adjust the aspect ratio by referring to the following: Please setup the display format as 16:9 (wide) aspect ratio type on your DVD player. Image is too small or too large Move the projector closer to or further from the screen. Press "Menu" button on the remote control or projector panel, go to "DISPLAY Format" and try the different settings. Image is reversed Select "SETUP Projection" from the OSD and adjust the projection direction. The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before reconnecting power. Check that "Keypad Lock" is not activated by trying to control the projector with the remote control. English 72