Optoma TX762 User's Manual - Page 50
Image is out of focus, Image is too small or too large, Image has slanted sides, Image is reversed
UPC - 796435411329
View all Optoma TX762 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Appendices Image is out of focus Make sure the lens cap is removed. Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance. See page 17. The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the projector will show the best image when the projector display mode is set to 16:9 in the OSD. If you play 4:3 format DVD titles, please change the format to 4:3 in the projector OSD. If the image is still stretched, you will also need to adjust the aspect ratio by referring to the following: Please setup the display format as 16:9 (wide) aspect ratio type on your DVD player. Image is too small or too large Adjust the Zoom Ring on the top of the projector. Move the projector closer to or further from the screen. Press "Menu" button on the remote control or projector panel, go to "Display Format" and try the different settings. Image has slanted sides If possible, reposition the projector so that it is horizontally centered on the screen and below the bottom of the screen. Press "Keystone +/-" button on the remote control or press " / " on the projector panel, until the sides are vertical. Use of Keystone is Image is reversed not recommended. Select "SETUP Projection" from the OSD and adjust the projection direction. English 50