Optoma W351 Manual - Page 45
SETUP | LAN Settings
View all Optoma W351 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
User Controls SETUP | LAN Settings Network State Choose "Connect" to enable LAN network function. Choose "Disconnect" to disable LAN network function. (Read- Only mode) DHCP If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired when you select DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Use ▲ or ▼ to select the number of IP address, Subnet Mask, and Gateway. Default value is off. IP Address Select an IP address. Default value is 192.168.0.100. Subnet Mask Configure the Subnet Mask of the LAN connection. Default value is 255.255.255.0. Gateway Check the Gateway address with your network/system administrator if you wish to configure it manually. Default value is 192.168.0.254. 45 English