Optoma W515 User manual - Page 53
Specification for RS232 by TELNET, Telnet: TCP.
View all Optoma W515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
USING THE PROJECTOR Specification for "RS232 by TELNET": 1. Telnet: TCP. 2. Telnet port: 23 (for more detail, kindly please get contact with the service agent or team). 3. Telnet utility: Windows "TELNET.exe" (console mode). 4. Disconnection for RS232-by-Telnet control normally: Close 5. Windows Telnet utility directly after TELNET connection ready. ±± Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network payload for Telnet-Control application. ±± Limitation 2 for Telnet-Control: there is less than 26 bytes for one complete RS232 command for Telnet-Control. ±± Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 200 (ms). English 53
English
53
USING THE PROJECTOR
Specification for "RS232 by TELNET"
:
Telnet: TCP.
1.
Telnet port: 23 (for more detail, kindly please get contact with the service agent or team).
2.
Telnet utility: Windows "TELNET.exe" (console mode).
3.
Disconnection for RS232-by-Telnet control normally: Close
4.
Windows Telnet utility directly after TELNET connection ready.
5.
Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network payload for
±
Telnet-Control application.
Limitation 2 for Telnet-Control: there is less than 26 bytes for one complete RS232 command for
±
Telnet-Control.
Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 200
±
(ms).