Optoma ZU510T-W ZU510T B User Manual - Page 16
Powering the Projector On/Off, POWER/STANDBY
View all Optoma ZU510T-W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
SETUP AND INSTALLATION Powering the Projector On/Off Powering On the Projector 1. Securely connect the power cord and signal cable. When connected, the POWER/STANDBY LED will turn Red. 2. Turn on the lamp by pressing the " " button either on the projector or on the remote. At this moment, the POWER/ STANDBY LED will now turn Blue. ① The startup screen will display in approximately 6 sec- onds. 3. Turn on and connect the source that you want to display on the screen (computer, notebook, video player, etc). The projector will detect the source automatically. `` If you connect multiple sources at the same time, press the "INPUT" button on the control panel to switch between inputs. Note: When the power mode is in standby mode (power consumption < 0.5W), the VGA output/Wire remote/LAN will be deactivated when the projector is in standby. Audio out loop-through is always active in standby mode. HDBaseT control is always deactivated in standby mode. 1 POWER/STANDBY Note: Turn on the projector first and then select the signal sources. 16 English