Oreck Air3000 Owners Guide - Page 4

PREPARING FOR OPERATION Before you operate your air cleaner you must: 1.Remove the plastic bag from the Germastat Filter taped to the outside of your air cleaner. 2.Remove the plastic bag surrounding your air cleaner. 3.Remove the cabinet top by lifting up. Using the cell handle, remove the collector cell from the cabinet. 4.Place the Germastat filter in the slots provided on the back side of the collecting cell. (White front should face the front of the air cleaner) Figure 3 5.Install the collector cell into the air OPERATION cleaner. (Aluminum pre-filter will face the front grille.) WARNING 6.Replace the cabinet top. Your air cleaner is now ready for operation. represeri UNIT LOCATION Select the location for your air cleaner with an electrical outlet nearby. An example of locating your air cleaner is shown in Figure 3. Plug the cord into any standard household electrical outlet. (See data label for electrical specifications and power consumption. This data label can be seen when the cabinet top is removed.) ►ARMING NOTE: Do not use an extension cord to supply power to your air cleaner. other);;;As:a safety feature thi:s;' Your console air cleaner can be placed almost anywhere as long as the air can freely circulate into the top front grille and out of the bottom front grille. (Figure 1) fit frill ;in tt a outlet reverselh:00 plug ;If t stilldoes not Ia, contact =; .40(000:*(0.0104hpijnot tetrilt ii*defeoitthwo..00ty:katiled. 2