Oreck Steam-Glide User Guide - Page 18

Troubleshooting Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide. All other servicing should be done by an Oreck authorized service center. Problem Cleaner will not run Steam is not emitted when the steam cleaner is ON. Check • Not plugged in properly. • Wall outlet is faulty. • The power cable is damaged. • Water tank is empty. • Hard water filter is clogged. • The steam switch is not activated properly. Solution • Be sure vacuum is firmly plugged into wall outlet. • Check electrical source - fuse or circuit breaker. • If power cable is damaged, contact Oreck for service. • Fill water tank. • Change water filter. • Pull the trigger on the handle to release steam. Unit still does Check all the above Contact Oreck for not operate points. service. properly. 18