Oregon Scientific ATCMini-S User Manual 2 - Page 8
Battery Installation & Charging
 |
View all Oregon Scientific ATCMini-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Operating Elements - Battery Installation & Charging • Insert the provided battery to the battery compartment. The metal contacts should face toward the camera. • Lever the latch to pull the battery out. Make sure the battery is locked in place. 1. Connect the camera to a USB port through USB cable. The status indicator will flash green and red alternately and two beeps will be generated. 2. When charging is finished, the status indicator turns green and a long beep will be generated. Remove the camera from the USB port. Recharge the battery when the status indicator flashes green. The battery is low. Please fully charge the battery before first use. ATCMini - 6 en.indd 6 8/9/2011 1:17:12
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
ATCMini –
6
Operating Elements -
Battery Installation & Charging
•
Insert the provided battery to the battery
compartment. The metal contacts should face
toward the camera.
•
Lever the latch to pull the battery out�
1�
Connect the camera to a USB port through USB
cable�
The status indicator will flash green and
red alternately and two beeps will be generated.
2�
When charging is finished,
the status indicator
turns green and a long beep will be generated.
Remove the camera from the USB port.
Make sure the battery is locked in place�
Recharge the battery when the status indicator
flashes green. The battery is low.
Please fully charge the battery before first use.
en.indd
6
8/9/2011
1:17:12