Oregon Scientific BAR338PA User Manual - Page 5

GB Feature Adjustable Projector FOCUS Knob (A11) [ ] IMAGE ROTATION knob (A10) 180° ROTATION button (A12) Projector Features Effect Instructions Rotates 180° to cast Adjust by pivoting forwards image onto any wall or backwards the projector, so that the projection lens is pointed in the appropriate direction Focuses image Rotate knob forwards or backwards until the image clarity is optimized Rotates image on a Turns an image to maintain given surface to an upright position maintain an upright position Horizontally flips Flips an image to maintain an image on a given an upright position surface to maintain an upright position 1. Unscrew the cover at the bottom of the stand. 2. Plug the adapter into the adapter socket. 3. Connect the power adapter to a wall socket. 4. Slide [PROJECTION ON] to ON. To turn off the projector, slide the [PROJECTION ON] back. Note that this switch can only be used with the power adapter connected. For momentarily projection, use [SNOOZE/LIGHT]. HOW TO USE THE BACKLIGHT Press the [SNOOZE/LIGHT] button once. The backlight will light up on the LCD Display and around the key panel for five seconds. Projection will also be on for five seconds. HOW TO USE THE PROJECTOR POWER ADAPTER Your BAR338PA comes with an AC power adapter. For continuous projection the AC power adapter must be used. To install the adapter: DISPLAY MODES In normal display mode, the current time, including seconds, will be displayed. To display weekday, press [CLOCK] once. To switch back to normal time display, press [CLOCK] once. 5