Oregon Scientific EW98 User Manual - Page 2

Note 1. During the setting period, press and hold "+/ CHANNEL" or "-/MIN.MAX." key to speed up the change of settings. 2. The time zone indicators are abbreviated as below: P=Pacific, M=Mountain, C=Central, E=Eastern. ALARM TIME SETTING 1. In normal time mode, press "SET ALARM" key once to enter the alarm time setting mode. 2. Press "+/CHANNEL" or "-/MIN.MAX." key to set hour/minute. 3. Press "SET ALARM" key to save and exit the setting mode " " indicates alarm is ON. Normal time mode Note Alarm time setting 1. The alarm will be automatically turned on when you set the alarm time. 2. During the alarm time setting period, press and hold "+/CHANNEL" or "-/MIN.MAX." key to speed up the change of settings. USING ALARM FUNCTION 1. Follow the directions above to set the alarm time. 2. In normal time mode, press "ALARM ON/OFF" key once to display the current alarm time. 3. Press it again to turn alarm ON/OFF. TO SILENCE THE ALARM 1. Press "SNOOZE/LIGHT" to silence the alarm for 8 minutes. The " " will be flashing. 2. Press any other key to turn the alarm off and activate it again after 24 hours. 3. If no key is pressed within 120 seconds, the alarm will be turned off and be activated again after 24 hours. USING THE PROJECTOR Slide the "PROJECTION ON/OFF" switch to turn on/ off the projection light. The projection light must be on a dark background and within 1-4 meters (3 to 12 feet) from the clock, see example below: Note 1. Slide "PROJECTION ON/OFF" to turn on the projection function. 2. Press "SNOOZE/LIGHT" to turn on the projector for 5 seconds. 3. When using DC power adapter, the projector will be turned on all the time. 4. The indoor and outdoor temperature will be projected alternatively for 5 seconds. 5. If the alarm is set to go off, the alarm icon " " will be projected. 6. Press "180 FLIP" to rotate the projected image by 180°. 7. Turn "FOCUS" knob to focus the projected image. READING INDOOR AND OUTDOOR TEMPERATURE RECORDS Slide "ºC/ºF" switch to select between Celsius and Fahrenheit. Note 1. If no signals are received or the transmission is interfered, "--" will appear on the display. 2. Replace the batteries if the batteries are low, relocate the sensor or main display unit away from electronic devices, or hit the reset buttons on the main display unit and sensor. VIEWING THE MINIMUM AND MAXIMUM TEMPERATURE RECORDS 1. In normal mode, press "-/MIN.MAX." key twice to show the minimum indoor & outdoor temperature records in the past 24 hours. 2. Press it again to show the maximum temperature records. 3. Press it again to exit. Note Press and hold it for 3 seconds to delete the minimum and maximum temperature records. MAX.temperature records MIN.temperature records USING ICE ALERT FUNCTION If the outdoor temperature range is -2.0ºC ~ 3.0ºC (28.4ºF ~ 37.4ºF), the ice alert indicator light will be turned on and flash. BATTERY REPLACEMENT If the low battery icon turns on next to the outdoor temperature reading, replace the sensor's battery with 2 AAA batteries. If the low battery icon turns on next to time, replace the main unit's battery with 2 new AA batteries. Low battery indicator Note Attention! Please dispose of the used unit or batteries in an ecologically safe manner. PLACEMENT OF MAIN UNIT AND SENSOR For the sensor, place the screw on the desired wall and hang the sensor by the recessed hole in the back of it or simply place it on the desktop. For the main unit, you can just place it on the table by itself. SPECIFICATIONS TYPE MAIN UNIT L x W x H DESCRIPTION 138 x 42 x 82 mm (5.43 x 1.65 x 3.23 in) Weight 196g Signal frequency Temperature range 433 MHz -5°C to 50°C (23°F to 122°F) Temperature resolution 0.1°C (0.2°F) Ice alert temperature range 3°C to -2°C (37°F to 28°F) Power 2 x AA 1.5V batteries REMOTE UNIT (EW-99) L x W x H 58 x 23 x 100 mm (2.28 x 0.9 x 3.94 in) Weight 52g Signal frequency Number of channel Transmission range 433 MHz 3 30 m (98 ft) unobstructed Temperature range -20°C to 60°C (-4°F to 140°F) Power 2 x AAA 1.5V batteries Note We recommend that you use alkaline batteries with this product for longer usage and lithium batteries in temperatures below freezing. PRECAUTIONS • Do not subject the unit to excessive force, shock, dust, temperature or humidity. • Do not cover the ventilation holes with any items such as newspapers, curtains etc. • Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. • Do not clean the unit with abrasive or corrosive materials. • Do not tamper with the unit's internal components. This invalidates the warranty. • Only use fresh batteries. Do not mix new and old batteries. • Images shown in this manual may differ from the actual display. • When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste. • Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer's care instructions for information. • The contents of this manual may not be reproduced without the permission of the manufacturer. • Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. • Please note that some units are equipped with a battery safety strip. Remove the strip from the battery compartment before first use. Note The technical specifications for this product and the contents of the user manual are subject to change without notice. ABOUT OREGON SCIENTIFIC Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. If you're in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support For international inquiries, please visit: www2.oregonscientific.com/about/international FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales. Please visit our website at www2.oregonscientific.com/service/support for all inquiries. We Name: Address: Telephone No.: Oregon Scientific, Inc. 19861 SW 95th AVe., Tualatin, Oregon 97062 USA 1-800-853-8883 Declare that the product Product No.: Product Name: Manufacturer: Address: EW98 Projection Alarm Clock with Indoor / Outdoor Thermometer and Ice Alert IPM Concepts Limited Block C, 9/F, Kaiser Estate, Phase 1,41 Man Yue St., Hung Hom, Kowloon, Hong Kong is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. C 2009 Oregon Scientific. All rights reserved