Palsonic 5120G/B/S Owners Manual - Page 20

OPERATION Other functions (continued) CHANNEL SWAP Making use of CHANNEL SWAP you can reorder the programs in your favorite order. Press the MENU button repeatedly to select and highlight SWAP icon. Press VOL +/- button to enter into CHANNEL SWAP menu. Press POS +/- button to select "POSITION A: -" item, then input the desired channel number which you want to swap by pressing "0-9" or "--/---" button. Press POS+/- button to select "POSITION B: -" item,press "0-9" or "--/---" button to input the channel number which you want to swap to. Press the POS+/- button to select "EXCHANGE" item, press VOL +/- button to confirm. Then channel A and channel B's programs are swapped. Super receiving function SWAP CHANNEL SWAP POSITION A: 5 POSITION B :14 EXCHANGE : OK Below we will describe how to make use of super receiving function. Pressing the SUPER button on the remote controller can change the current program's super receiving mode to ON or OFF. Or you can press PRESET button to enter into PRESET menu, press POS+/-button to select S-RCV item, press VOL +/- button can change the current program's super receiving mode to ON or OFF. S-RCV ON PRESET POS SKIP BAND FINE AFT SEARCH ASM S-RCV 22 OFF UHF OFF OFF or ON Note : 1) After AUTO SEARCH (ASM). all the searched programs are set to S-RCV OFF automatically 2) When receiving signals are stronger, please set to S-RCV to OFF mode Program Scan Press SCAN button, the TV set will scan the channels from current channel to higher channels one by one, the upper right corner of the screen will display position number, ever program will be displayed for about 2 seconds and then go on scanning until all the programs are scanned over. Press SCAN button again, the screen will settle at the current scanned program. 7 SCAN 14 18